LOCKPORT, IL —
OSHA Inspection: J&M WOOD PRODUCTS
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of J&M WOOD PRODUCTS in 14000 ARCHER AVE., LOCKPORT, IL 60441 (NAICS 321113). OSHA activity number 341155992.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J&M WOOD PRODUCTS
- Site address
- 14000 ARCHER AVE.
- City
- LOCKPORT
- State
- IL
- ZIP
- 60441
- Mailing
- 33990 N. STATE ROAD, GENOA, IL 60135
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Apr 11, 2016
- Abate by
- May 5, 2016
- Penalty
- Initial $2,800 · Current $1,416 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l). Throughout Facility - On or about January 4, 2016, operators were not trained in the safe operation of Caterpillar Wheel Loader IT28B, Serial # 1HF02366 with fork attachments, thereby exposing all employees in the facility to struck by hazards.
Recent events (2)
- — I (S) $1416
- — Z (S) $2800
1910.265 C04 IV
- Issued
- Apr 11, 2016
- Abate by
- May 5, 2016
- Penalty
- Initial $2,400 · Current $1,416 Reduced
General-duty citation text
29 CFR 1910.265(c)(4)(iv): Elevated walks. All elevated walks, runways, or platforms, if 4 feet or more from the floor level, shall be provided with a standard railing except on loading or unloading sides of platforms. If height exceeds 6 feet, a standard toe board also shall be provided to prevent material from rolling or falling off. Throughout Facility - On or about January 4, 2016, the employer failed to provide guardrails on the log deck, thereby exposing employees to 52 inch falls.
Recent events (2)
- — I (S) $1416
- — Z (S) $2400
1910.265 C04 V
- Issued
- Apr 11, 2016
- Abate by
- May 5, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.265(c)(4)(v): Elevated platforms. Where elevated platforms are used routinely on a daily basis they shall be equipped with stairways or fixed ladders in accordance with 1910.27. Throughout Facility - On or about January 4, 2016, the employer failed to provide employees with a safe way to access the log deck for removal of chains on logs, thereby exposing employees to 52 inch falls when on top of the log deck.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.265 E01 V
- Issued
- Apr 11, 2016
- Abate by
- May 5, 2016
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1910.265(e)(1)(v): Barriers and warning signs. A barrier shall be provided to prevent employees from entering the space necessary for travel of the carriage, with headblocks fully receded, for the full length and extreme ends of carriage runways. Warning signs shall be posted at possible entry points to this area. Throughout Facility - On or about January 4, 2016, the employer failed to provide a barrier and warning signs to prevent employees from entering into the Dixson Sawmill, Model TS40, while in operation, thereby exposing employees to multiple injuries due to struck by hazards.
Recent events (2)
- — I (S) $7000
- — Z (S) $7000
1910.219 F03
- Issued
- Apr 11, 2016
- Abate by
- Apr 21, 2016
- Penalty
- Initial $2,800 · Current $1,418 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets. a. Throughout Facility - On or about January 4, 2016, chains and sprockets on the log deck were not completely guarded, thereby exposing employees to the hazards associated with moving parts. b. Throughout Facility - On or about January 4, 2016, chains and sprockets on the carriage were not completely guarded, thereby exposing employees to the hazards associated with moving parts.
Recent events (2)
- — I (S) $1418
- — Z (S) $2800
1910.303 G02 I
- Issued
- Apr 11, 2016
- Abate by
- Apr 28, 2016
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more shall be guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the following means: Throughout Facility - On or about January 4, 2016, the employer had not ensured to fully enclose boxes and live electric equipment of the Dixson saw mill, TS40, thereby exposing employees to electrical shock.
Recent events (2)
- — I (S) $0
- — Z (S) $2800
More inspections in this industry (NAICS 321113)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341155992.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.