ENDWELL, NY —
OSHA Inspection: PROGRESSIVE TOOL CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PROGRESSIVE TOOL CO., INC. in 3221 LAWNDALE STREET, ENDWELL, NY 13760 (NAICS 332710). OSHA activity number 341161362.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PROGRESSIVE TOOL CO., INC.
- Site address
- 3221 LAWNDALE STREET
- City
- ENDWELL
- State
- NY
- ZIP
- 13760
- Mailing
- 3221 LAWNDALE STREET, ENDWELL, NY 13760
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 27
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C06 I
- Issued
- Jan 27, 2016
- Abate by
- Mar 2, 2016
- Penalty
- Initial $1,785 · Current $1,339 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) At the establishment, on or about 1/7/16: There were no annual inspections conducted on the lockout/tagout procedures to ensure that the procedures and requirements of the standard were being followed. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $1338.75
- — Z (S) $1785
1910.212 A01
- Issued
- Jan 27, 2016
- Abate by
- Mar 2, 2016
- Penalty
- Initial $2,380 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Lathe Dept., on or about 1/7/16: Rotating parts and ingoing nip points on a chip conveyor at the discharge end for the Feeler CNC lathe were not guarded. b) Lathe Dept., on or about 1/7/16: Rotating parts and ingoing nip points on a chip conveyor at the discharge end for the Takisawa CNC lathe were not guarded. c) Manual Milling Area, on or about 1/7/16: Point of operation on a Tree Milling machine using a shell mill was not guarded. Abatement certification must be submitted for these items.
Recent events (2)
- — I (S) $1785
- — Z (S) $2380
1910.303 F02
- Issued
- Jan 27, 2016
- Abate by
- Mar 2, 2016
- Penalty
- Initial $1,785 · Current $1,339 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose: a) Time Clock Area, on or about 1/7/16: A circuit breaker panel did not have 16 breakers labeled as to what they controlled. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $1338.75
- — Z (S) $1785
1910.305 B01 II
- Issued
- Jan 27, 2016
- Abate by
- Mar 2, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) Time Clock Area, on or about 1/7/16: A circuit breaker panel had one blank missing, exposing live electrical parts. Abatement certification must be submitted for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Jan 27, 2016
- Abate by
- Mar 2, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a) Mill Dept., on or about 1/7/16: Flexible cord was pulled loose from duplex outlet fitting at the Shizuoka CNC Mill #4024. Abatement certification must be submitted for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Progressive Tool CO., INC.
View Progressive Tool CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341161362.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.