NORTH CANTON, OH —
OSHA Inspection: MIDWEST INNOVATIONS LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MIDWEST INNOVATIONS LLC in 1098 NORTH MAIN STREET, NORTH CANTON, OH 44720 (NAICS 624310). OSHA activity number 341164374.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIDWEST INNOVATIONS LLC
- Site address
- 1098 NORTH MAIN STREET
- City
- NORTH CANTON
- State
- OH
- ZIP
- 44720
- Mailing
- 107 TOMMY HENRICH DR. NW, MASSILLON, OH 44647
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 624310
- Employees
- 43
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 C01
- Issued
- Jan 27, 2016
- Abate by
- Feb 16, 2016
- Penalty
- Initial $4,900 · Current $3,920 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or before 12/17/2015, the employer failed to ensure that employees assigned to use the Skillsaw 3310, were provided with the automatically adjusting hood guard while cutting wood stock.
Recent events (2)
- — I (S) $3920
- — Z (S) $4900
1910.213 D01
- Issued
- Jan 27, 2016
- Abate by
- Feb 16, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1): Each circular crosscut table saw shall be guarded by a hood which shall meet all the requirements of paragraph (c)(1) of this section for hoods for circular ripsaws. On or before 12/17/2015, the employer failed to ensure that employees assigned to use the Skillsaw 3310, were provided with the automatically adjusting hood guard while cutting wood stock.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jan 27, 2016
- Abate by
- Feb 16, 2016
- Penalty
- Initial $4,900 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: On or before 12/17/2015, the employer failed to ensure that employees tasked with operating the Skillsaw 3310, were provided an anti-kickback fingers, or dogs, when ripping.
Recent events (2)
- — I (S) $0
- — Z (S) $4900
1910.213 S09
- Issued
- Jan 27, 2016
- Abate by
- Feb 16, 2016
- Penalty
- Initial $4,900 · Current $3,920 Reduced
General-duty citation text
29 CFR 1910.213(s)(9): Suitable sizes and types of push sticks or push blocks were not provided at the work place: On or before 12/17/2015, the employer failed to ensure that employees operating the Skillsaw 3310, were provided with push sticks when pushing the wood through the blade of the saw.
Recent events (2)
- — I (S) $3920
- — Z (S) $4900
1910.334 A03 I
- Issued
- Jan 27, 2016
- Abate by
- Feb 16, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(3)(i): A flexible cord used with the type of ground equipment did not contain an electrical equipment grounding conductor: On or before 12/17/2015, the employer failed to ensure that the extension cords, that were used for the Skillsaw 3310, had grounding prongs.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 624310)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341164374.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.