Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RUSTY'S OFFROAD PRODUCTS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of RUSTY'S OFFROAD PRODUCTS, INC. in 7161 STEELE STATION ROAD, RAINBOW CITY, AL 35906 (NAICS 336390). OSHA activity number 341183044.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rusty'S Offroad Products, INC. — free Get an email when a new federal OSHA severe-injury report for Rusty'S Offroad Products, INC. is published. One employer, no account, unsubscribe in one click.
Site address
7161 STEELE STATION ROAD
City
RAINBOW CITY
State
AL
ZIP
35906
Mailing
7161 STEELE STATION ROAD, RAINBOW CITY, AL 35906
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336390
Employees
14
Ownership type
A

6 citations on file for this inspection.

1910.147 C01

Serious Gravity 10 3 instances 3 exposed
Issued
Mar 15, 2016
Abate by
Mar 25, 2016
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  (b) On or about 01/13/16 - Machine shop, maintenance and operators are performing servicing and maintenance activities on various CNC machines without utilizing control of hazardous energy procedures for electrical, hydraulic and pneumatic energy sources.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1910.157 C01

Serious Gravity 1 1 instance 3 exposed
Issued
Mar 15, 2016
Penalty
Initial $1,200 · Current $720 Reduced
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  (a) On or about 01/13/16 - Machine shop, there were no portable fire extinguishers available for use.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1910.157 C04

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 15, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition:   (a) On or about 01/13/16 - Shipping, portable fire extinguishers were not maintained in a serviceable condition.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.242 B

Serious Gravity 5 3 instances 3 exposed
Issued
Mar 15, 2016
Abate by
Mar 25, 2016
Penalty
Initial $1,600 · Current $960 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  (a) On or about 01/13/16 - Machine shop, air nozzles were used with an output of 90 p.s.i. to clean off parts and tools.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

1910.1200 E01

Serious Gravity 5 1 instance 8 exposed
Issued
Mar 15, 2016
Abate by
Mar 29, 2016
Penalty
Initial $1,600 · Current $960 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:   (a) On or about 01/13/2016 - Shop areas, the employer had not developed a written hazard communication program for various shop employees who were exposed to hazardous chemicals including, but not limited to, coolants, degreaser cleaners, hydraulic fluid and welding rods.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

1910.132 D02

Other-than-serious 1 instance 8 exposed
Issued
Mar 15, 2016
Abate by
Mar 25, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:  (a) On or about 01/13/2016 - Maintenance shop, the employer did not have a certification of a hazard assessment of workplace PPE requirements.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Rusty'S Offroad Products, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341183044.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.