GADSDEN, AL —
OSHA Inspection: GOODYEAR TIRE AND RUBBER COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GOODYEAR TIRE AND RUBBER COMPANY in 922 EAST MEIGHAN BLVD, GADSDEN, AL 35903 (NAICS 326211). OSHA activity number 341183135.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GOODYEAR TIRE AND RUBBER COMPANY
- Site address
- 922 EAST MEIGHAN BLVD
- City
- GADSDEN
- State
- AL
- ZIP
- 35903
- Mailing
- 922 EAST MEIGHAN BLVD, GADSDEN, AL 35903
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326211
- Employees
- 1641
- Ownership type
- A
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- May 24, 2016
- Abate by
- Aug 21, 2017
- Penalty
- Initial $7,000 · Current $5,600 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to high pressure release from head being opened on Banbury machine: (a) On or about 01/08/16 - # 2 Banbury Palletizer Machine, employees were exposed to high pressure being released while opening the head on the malfunctioning machine.
Recent events (3)
- — J (S) $5600
- — C (S) $7000
- — Z (S) $7000
1910.22 A01
- Issued
- May 24, 2016
- Abate by
- Jul 31, 2017
- Penalty
- Initial $5,610 · Current $5,610
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition: (a) On or about 01/14/16 - 3rd floor Banbury mixing department, the floors and walkways were not maintained in an orderly condition due to accumulation and presence of oil, grease, hoses, raw material pellets, dust, and other materials.
Recent events (3)
- — J (O) $5610
- — C (S) $5610
- — Z (S) $5610
1910.23 C01
- Issued
- May 24, 2016
- Abate by
- Jul 31, 2017
- Penalty
- Initial $7,000 · Current $4,500 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: (a) On or about 01/14/16 - 3rd floor # 11 Banbury dust collector platform, intermediate rails were not provided.
Recent events (3)
- — J (S) $4500
- — C (S) $7000
- — Z (S) $7000
1910.23 A08
- Issued
- May 24, 2016
- Abate by
- Jul 31, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(a)(8): Every floor hole into which persons can accidentally walk were not guarded: (a) On or about 01/14/16 - 3rd floor at #10 Banbury dust collector, the opening around the equipment was not adequately guarded.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.219 C02 I
- Issued
- May 24, 2016
- Abate by
- Jul 31, 2017
- Penalty
- Initial $5,610 · Current $4,975 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: (a) On or about 01/14/16 - 3rd floor Banbury mixing department, at the# 10 and#12 filter fan dust collectors, the rotating shafts were not guarded.
Recent events (3)
- — J (S) $4975
- — C (S) $5610
- — Z (S) $5610
1910.219 C04 I
- Issued
- May 24, 2016
- Abate by
- Jul 31, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: (a) On or about 01/14/2016 - 3rd floor Banbury mixing department at the zero pellet exhauster, a shaft was not guarded.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.303 F02
- Issued
- May 24, 2016
- Abate by
- Jul 31, 2017
- Penalty
- Initial $5,610 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: (a) On or about 01/14/16 - 3rd floor Banbury mixing department at the black and white end, electrical circuits for 120 volt breakers were not labeled.
Recent events (3)
- — J (S) $2500
- — C (S) $5610
- — Z (S) $5610
1910.305 B01 II
- Issued
- May 24, 2016
- Abate by
- Jul 31, 2017
- Penalty
- Initial $5,610 · Current $5,610
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) On or about 01/14/16 - 3rd floor Banbury mixing department at the white end, unused circuits in the circuit breaker panel were not covered.
Recent events (3)
- — J (O) $5610
- — C (S) $5610
- — Z (S) $5610
1910.305 B02 I
- Issued
- May 24, 2016
- Abate by
- Jul 31, 2017
- Penalty
- Initial $2,805 · Current $2,805
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: (a) On or about 01/14/2016 - 3rd floor Banbury mixing department, three 110 volt electrical outlets were observed without covers in place.
Recent events (3)
- — J (O) $2805
- — C (S) $2805
- — Z (S) $2805
More inspections at Goodyear Tire and Rubber Company
View Goodyear Tire and Rubber Company's full OSHA safety record →
More inspections in this industry (NAICS 326211)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341183135.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.