CASEY, IL —
OSHA Inspection: PIONEER OIL COMPANY, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of PIONEER OIL COMPANY, INC. in 2328 CR 1000 N., CASEY, IL 62420 (NAICS 213112). OSHA activity number 341183440.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PIONEER OIL COMPANY, INC.
- Site address
- 2328 CR 1000 N.
- City
- CASEY
- State
- IL
- ZIP
- 62420
- Mailing
- 400 MAIN STREET, VINCENNES, IN 47591
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 213112
- Employees
- 67
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 20, 2016
- Abate by
- Apr 26, 2016
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: On or about January 12, 2016, Pioneer Oil Company, Inc. had an employee exposed to moving parts which were not adequately guarded, on a pump jack, Shore # T-5. These unguarded moving parts inlcuded: a. Clutch assembly and b. Wrist pin bearing/crank arm.
Recent events (2)
- — I (S) $7000
- — Z (S) $7000
1910.212 A05
- Issued
- Apr 20, 2016
- Penalty
- Initial $3,500 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.212(a)(5): Fan blade guard(s) were not provided where the periphery of the blades was less than seven feet from the floor or working level: On or about January 12, 2016, Pioneer Oil Company, Inc. had an employee exposed to an unguarded fan on a pump jack, Shore# T-5.
Recent events (2)
- — I (S) $2450
- — Z (S) $3500
1910.219 B01
- Issued
- Apr 20, 2016
- Penalty
- Initial $4,900 · Current $3,430 Reduced
General-duty citation text
29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv)(a): On or about January 12, 2016, Pioneer Oil Company, Inc. had an employee exposed to two unguarded flywheels on a pump jack, Shore # T-5.
Recent events (2)
- — I (S) $3430
- — Z (S) $4900
1910.219 D01
- Issued
- Apr 20, 2016
- Penalty
- Initial $4,900 · Current $3,430 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about January 12, 2016, Pioneer Oil Company, Inc. had an employee exposed to moving parts and ingoing pinch points due to four unguarded pulleys used to operate the pump jack and associated fan, on pump jack, Shore# T-5.
Recent events (2)
- — I (S) $3430
- — Z (S) $4900
1910.219 E01 I
- Issued
- Apr 20, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): On or about January 12, 2016, Pioneer Oil Company, Inc. had an employee exposed to ingoing pinch points due to an two unguarded pulley/belt systems used to operate a pump jack and associated fan, on pump jack, Shore# T-5.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 213112)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341183440.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.