OSHA Inspection: MANUFACTURED AND MODULAR AXLE AND TIRE

Issued

2016-02-22 00:00:00

Abate by

2016-03-10 00:00:00

Penalty

Initial $2000.00 · Current $2000.00

General-duty citation text

29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  a) Shop Area: On or about January 20, 2016 and at times prior, employees were exposed working while exit routes were obstructed by materials including axles.  NOTE: Abatement certification is required for this item.

Issued

2016-02-22 00:00:00

Abate by

2016-03-10 00:00:00

Penalty

Initial $2400.00 · Current $2400.00

General-duty citation text

29 CFR 1910.178(l)(3): Powered industrial truck operators did not receive initial training regarding operating instructions, warnings, and precautions for the types of truck the operator was authorized to operate:  a) On or about January 20, 2016 and at times prior, powered industrial truck operators had not received training as prescribed in 29 CFR 1910.178(l).  NOTE: Abatement certification is required for this item.

Issued

2016-02-22 00:00:00

Abate by

2016-03-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  a) On or about January 20, 2016 and at times prior, individuals were operating a powered industrial truck with expired training which occurred on July 3, 2012 and expired July 3, 2015.  NOTE: Abatement certification is required for this item.

Issued

2016-02-22 00:00:00

Abate by

2016-03-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service:  a) On or about January 20, 2016 and at times prior, power industrial trucks used in the workplace were not inspected before use.  NOTE: Abatement certification is required for this item.

Issued

2016-02-22 00:00:00

Abate by

2016-03-10 00:00:00

Penalty

Initial $2400.00 · Current $2400.00

General-duty citation text

29 CFR 1910.252(a)(2)(vii): Where practicable, combustible materials were not relocated at least 35 feet (10.7 m) from the cutting or welding operation work site:  a) On or about January 20, 2016 and at times prior, employees were welding axles in shop area within 35 feet of diesel fuel, tires, boxes, and other combustible material.   NOTE: Abatement certification is required for this item.

Issued

2016-02-22 00:00:00

Abate by

2016-03-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.252(a)(2)(xiii): The employer did not recognize its responsibility for the safe usage of cutting or welding equipment on its property, in accordance with 29 CFR 1910.252 (a)(2)(xiii)(A) through 29 CFR 1910.252(a)(2)(xiii)(D):  a) On or about January 20, 2016 and at times prior, employees welding in the shop area had not received training on the hazards and safe operation of welding equipment.  NOTE: Abatement certification is required for this item.

Issued

2016-02-22 00:00:00

Abate by

2016-03-10 00:00:00

Penalty

Initial $2000.00 · Current $2000.00

General-duty citation text

29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service:  a) On or about January 20, 2016 and at times prior, employees were using an 110v extension cord in the shop that was cut and frayed.  b) On or about January 20, 2016 and at times prior, employees were using an 220v extension cord in the shop that was damaged.  NOTE: Abatement certification is required for this item.

Issued

2016-02-22 00:00:00

Abate by

2016-03-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:  a) North shop wall: On or about January 20, 2016 and at times prior, a 120 volt AC 20 amp outlet did not have a faceplate.  NOTE: Abatement certification is required for this item.