LITITZ, PA —
OSHA Inspection: HENRY H. ROSS AND SON, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of HENRY H. ROSS AND SON, INC. in 121 KOSER ROAD, LITITZ, PA 17543 (NAICS 327991). OSHA activity number 341190973.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HENRY H. ROSS AND SON, INC.
- Site address
- 121 KOSER ROAD
- City
- LITITZ
- State
- PA
- ZIP
- 17543
- Mailing
- 121 KOSER ROAD, LITITZ, PA 17543
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 28
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.213 C01
- Issued
- Apr 1, 2016
- Abate by
- Apr 20, 2016
- Penalty
- Initial $2,975 · Current $1,815 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) 121 Koser Rd, Lititz, PA (rear shop) - On or about January 21, 2016 the Powermatic Model 66 table saw used for ripping / re-saw purposes was not provided with a guard for the 10" diameter saw blade. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date, and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1815
- — Z (S) $2975
1910.213 C02
- Issued
- Apr 1, 2016
- Abate by
- Apr 20, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) 121 Koser Rd, Lititz, PA (rear shop) - On or about January 21, 2016 the Powermatic Model 66 table saw used for ripping / re-saw purposes was not provided with a spreader for the 10" diameter saw blade. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date, and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Apr 1, 2016
- Abate by
- Apr 20, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:(a) (LOCATION) (IDENTIFY SPECIFIC OPERATION(S) AND/OR CONDITIONS) (DESCRIBE HAZARD(S) WHERE NECESSARY) a) 121 Koser Rd, Lititz, PA (rear shop) - On or about January 21, 2016 the Powermatic Model 66 table saw used for ripping / re-saw purposes was not provided with non-kickback fingers or a guard which would provide this protection for the 10" diameter saw blade. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date, and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- Apr 1, 2016
- Abate by
- Apr 20, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) 121 Koser Rd, Lititz, PA (rear shop) - On or about January 21, 2016, the tool rests provided on either side of the Delta Shopmaster bench grinder were not set to a maximum opening width of 1/8 inch. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date, and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 327991)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341190973.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.