ARLINGTON, TX —
OSHA Inspection: CORR-WOOD DBA T-BAR FENCE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CORR-WOOD DBA T-BAR FENCE, INC. in 1912 PEYCO DRIVE SOUTH, ARLINGTON, TX 76001 (NAICS 321920). OSHA activity number 341196145.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CORR-WOOD DBA T-BAR FENCE, INC.
- Site address
- 1912 PEYCO DRIVE SOUTH
- City
- ARLINGTON
- State
- TX
- ZIP
- 76001
- Mailing
- 1912 PEYCO DRIVE SOUTH, ARLINGTON, TX 76001
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 40
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 P01
- Issued
- Mar 24, 2016
- Abate by
- Apr 21, 2016
- Penalty
- Initial $2,100 · Current $1,155 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): At the establishment, in the shipping/receiving area, employees operated a Yale 6000 pound forklift, model 1006, that needed to have the seat replaced or repaired and was not taken out of service.
Recent events (2)
- — I (S) $1155
- — Z (S) $2100
1910.215 A04
- Issued
- Mar 24, 2016
- Abate by
- Apr 21, 2016
- Penalty
- Initial $2,800 · Current $1,540 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: At the establishment; in the machine shop, the work rests were not adjusted properly on the Dewalt bench grinder, model 54310, exposing employees to the hazard of being struck by the wheel.
Recent events (2)
- — I (S) $1540
- — Z (S) $2800
1910.215 B09
- Issued
- Mar 24, 2016
- Abate by
- Apr 21, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: At the establishment; in the machine shop, tongue guards were not adjusted properly on the Dewalt bench grinder, model 54310, bench grinder, exposing employees to the hazard of being struck by the wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B02
- Issued
- Mar 24, 2016
- Abate by
- Apr 21, 2016
- Penalty
- Initial $4,200 · Current $2,310 Reduced
General-duty citation text
29 CFR 1910.305(b)(2): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: At the establishment, in the production department, the employer did not ensure the electrical junction box that energized the CM80 lathe had a cover plate to protect the live components which exposed employees to the hazard of electrical shock.
Recent events (2)
- — I (S) $2310
- — Z (S) $4200
1910.37 B02
- Issued
- Mar 24, 2016
- Abate by
- Apr 21, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": At the establishment, in the production area, there was no exit sign provided over the door leading to the outside of the building, exposing employees to the hazard of egress in case of fire.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 C01
- Issued
- Mar 24, 2016
- Abate by
- Apr 21, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: At the establishment, at the east wall of the production department, the Kidde fire extinguisher was not identified, or mounted exposing employees to the hazard of fire.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 321920)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341196145.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.