TAMPA, FL ·
OSHA Inspection: COMRES MFG.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of COMRES MFG. in 7211 ANDERSON RD., TAMPA, FL 33634 (NAICS 332323). OSHA activity number 341198349.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COMRES MFG.
- Site address
- 7211 ANDERSON RD.
- City
- TAMPA
- State
- FL
- ZIP
- 33634
- Mailing
- 7211 ANDERSON RD., TAMPA, FL 33634
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332323
- Employees
- 17
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.23 C01
- Issued
- Feb 5, 2016
- Abate by
- Mar 24, 2016
- Penalty
- Initial $810 · Current $486 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent): (a) At the site - in the manufacturing area the mezzanine did not have guardrails exposing employees to a 12 foot fall when accessing this area, on or about 1/22/2016.
Recent events (2)
- · I (S) $486
- · Z (S) $810
1910.178 L01 I
- Issued
- Feb 5, 2016
- Abate by
- Jun 17, 2016
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) At the site - employees operating the Komatsu SN#10555 forklift were not trained, on or about 1/22/2016.
Recent events (2)
- · I (S) $720
- · Z (S) $1200
1910.178 P01
- Issued
- Feb 5, 2016
- Abate by
- Jun 17, 2016
- Penalty
- Initial $810 · Current $486 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): (a) At the site - the Komatsu SN#10555 forklift horn was inoperable and a seat belt was not provided, on or about 1/22/2016. (b) At the site - the Toyota forklift horn was inoperable and a seat belt was not provided, on or about 1/22/2016.
Recent events (2)
- · I (S) $486
- · Z (S) $810
1910.178 Q07
- Issued
- Feb 5, 2016
- Abate by
- Feb 18, 2016
- Penalty
- Initial $810 · Current $486 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: (a) At the site - the Komatsu SN#10555 forklift was not inspected before each work shift to ensure the safety of the vehicle, on or about 1/22/2016. (b) At the site - the Toyota forklift horn was not inspected before each work shift to ensure the safety of the vehicle, on or about 1/22/2016.
Recent events (2)
- · I (S) $486
- · Z (S) $810
1910.305 B01 II
- Issued
- Feb 5, 2016
- Abate by
- Mar 24, 2016
- Penalty
- Initial $810 · Current $486 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) At the site - in the manufacturing area the breaker box had unused openings, on or about 1/22/2016.
Recent events (2)
- · I (S) $486
- · Z (S) $810
1910.305 B02
- Issued
- Feb 5, 2016
- Abate by
- Mar 24, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: (a) At the site - in the manufacturing area the breaker box was not covered, on or about 1/22/2016. (b) At the site - in the manufacturing area the electrical outlet was not covered, on or about 1/22/2016.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 332323)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341198349.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.