ELKHORN, NE —
OSHA Inspection: HM BUILDERS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HM BUILDERS in 2524 N. 191ST STREET, ELKHORN, NE 68022 (NAICS 238130). OSHA activity number 341200673.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HM BUILDERS
- Site address
- 2524 N. 191ST STREET
- City
- ELKHORN
- State
- NE
- ZIP
- 68022
- Mailing
- 15843 BLACKWALNUT ST., OMAHA, NE 68136
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 16
- Ownership type
- A
Citations
2 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 26, 2016
- Abate by
- Mar 18, 2016
- Penalty
- Initial $2,800 · Current $2,000 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: The employer is failing to protect employees from fall and crushing hazards while using personnel platforms elevated by all-terrain forklifts. The most recent occurrence of this occurred at the job site located at 2524 N. 191st Street, Elkhorn, NE 68022 where the employer has employees being elevated using a Genie GTH-844 All-Terrain Forklift and a 5 foot by 16 foot platform. In accordance with ANSI B56.6 2002, the platform dimensions are not to exceed the axel base by more than 10 inches and in this case, the platform extended 31 inches past the allowable limits on each side of the forklift. This creates an issue of instability for the forklift when the platform is elevated which could cause the lift to tip or become unsteady enough to cause an employee to fall. Among other methods, feasible and acceptable methods of abatement are: a) Ensure that all employees involved in the operation are trained and briefed prior to working with this equipment of the hazards involving elevating employees and stability issues involving this piece of equipment. b) Ensure that all employees of the company follow both the manufacturers recommendations in the operators manual and follow the ASME/ANSI B56.6 2002 Safety Standard for Rough Terrain Forklift Trucks. c) Ensure the platform being used by the company meets the requirements of both the manufacturers requirements and the above listed ANSI Standard.
Recent events (2)
- — I (S) $2000
- — Z (S) $2800
1926.451 G04 I
- Issued
- Jan 26, 2016
- Abate by
- Mar 18, 2016
- Penalty
- Initial $2,800 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms before being released for use by employees other than erection/dismantling crews: The employer is failing to protect employees from fall hazards associated with working off of an unguarded work platform elevated by an all-terrain forklift. The most recent occurrence of this was found on the job site located at 2524 N. 191st Street, Elkhorn, NE 68022 where the employer has employees installing fascia for a new residential home while standing on a work platform elevated by an all-terrain forklift without having installed a guardrail system to protect the workers from the 12 foot fall hazard.
Recent events (2)
- — I (S) $2000
- — Z (S) $2800
More inspections at HM Builders
View HM Builders's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341200673.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.