Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: KINGSPAN INCORPORATED

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of KINGSPAN INCORPORATED in 203 GRAMATAN AVE, MOUNT VERNON, NY 10550 (NAICS 238140). OSHA activity number 341249910.

Watch Kingspan Incorporated — free Get an email when a new federal OSHA severe-injury report for Kingspan Incorporated is published. One employer, no account, unsubscribe in one click.
Site address
203 GRAMATAN AVE
City
MOUNT VERNON
State
NY
ZIP
10550
Mailing
PO BOX 780509, MASPETH, NY 11378
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
150
Ownership type
A

3 citations on file for this inspection.

1926.451 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $6300.00 · Current $3650.00 Reduced
29 CFR 1926.451(a)(1): Each scaffold and scaffold component was not capable of supporting, without failure, its own weight and at least 4 times the maximum intended load applied or transmitted to it:    a) On 3rd level of scaffold- An employee fell approximately 30 feet from a scaffold platform when the plank he was working on broke. It was not able to support 4 times the intended load applied or transmitted to it; on or about 1/11/16.
Recent events (3)
  • — J (S) $3650
  • — C (S) $6300
  • — Z (S) $6300

1926.451 G04 XV

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $6300.00 · Current $3650.00 Reduced
29 CFR 1926.451(g)(4)(xv): Crossbracing is acceptable in place of a midrail when the crossing point of two braces is between 20 inches (0.5 m) and 30 inches (0.8 m) above the work platform or as a toprail when the crossing point of two braces is between 38 inches (0.97 m) and 48 inches (1.3 m) above the work platform. The end points at each upright shall be no more than 48 inches (1.3 m) apart.    a) On 3rd level of scaffold- Employees were exposed to a fall of approximately 30 feet while working on a scaffold with crossbraces as a means of guardrails. The lower crossbrace crossing point was approximately 9.5" above the work platform allowing an opening of 33" from the crossbrace point to the top of the work platform; on or about 1/11/16.
Recent events (3)
  • — J (S) $3650
  • — C (S) $6300
  • — Z (S) $6300

1926.454 A

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $4500.00 · Current $1250.00 Reduced
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:    a) On third level of scaffold- Employees were not trained and were exposed to an approximate 33 ft fall while working on a tubular welded scaffold; on or about 1/11/16.
Recent events (3)
  • — J (S) $1250
  • — C (S) $4500
  • — Z (S) $4500

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341249910.