Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LITTLE CAESARS PIZZA

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of LITTLE CAESARS PIZZA in 105 NORTH HINDE STREET, WASHINGTON COURT HOUSE, OH 43160 (NAICS 722211). OSHA activity number 341250447.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Little Caesars Pizza — free Get an email when a new federal OSHA severe-injury report for Little Caesars Pizza is published. One employer, no account, unsubscribe in one click.
Site address
105 NORTH HINDE STREET
City
WASHINGTON COURT HOUSE
State
OH
ZIP
43160
Mailing
5174 PLEASANT AVE, FAIRFIELD, OH 45014
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
722211
Employees
18
Ownership type
A

5 citations on file for this inspection.

1910.132 D01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 7, 2016
Abate by
May 24, 2016
Penalty
Initial $5,000 · Current $2,500 Reduced
29 CFR 1910.132(d)(1): The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:    A) On February 12, 2016 the employer did not assess the hazards present on the Hobart Cutter Mixer and provide rubber insulating gloves to employees who were subject to exposed electrical wiring.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $5000

1910.303 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 7, 2016
Abate by
May 24, 2016
Penalty
Initial $5,000 · Current $2,500 Reduced
29 CFR 1910.303(b)(1): Examination. Electric equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees. Safety of equipment shall be determined using the following considerations:    a) On February 12, 2016 the Hobart Cutter Mixer was not free from an electrical hazard in that a panel was removed on the side of the machine that left energized electrical wiring exposed to employees and was likely to cause serious physical harm.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $5000

1910.332 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 7, 2016
Abate by
May 24, 2016
Penalty
Initial $5,000 · Current $3,000 Reduced
29 CFR 1910.332(b)(1): Practices addressed in this standard. Employees shall be trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertain to their respective job assignments.    A) On February 12, 2016 the employer did not train the employees on contacting energized electrical terminals together on the Hobart Cutter Mixer and ensure that they were familiar with safety related work practices.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5000

1910.333 C02

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 7, 2016
Abate by
May 24, 2016
Penalty
Initial $5,000 · Current $0 Reduced
29 CFR 1910.333(c)(2): "Work on energized equipment." Only qualified persons may work on electric circuit parts or equipment that have not been de-energized under the procedures of paragraph (b) of this section. Such persons shall be capable of working safely on energized circuits and shall be familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools.    a) On February 12, 2016 the employer did not ensure that only qualified persons work on electrical equipment such as the Hobart Cutter Mixer that had not been de-energized and that such persons be familiar with proper use of rubber insulating gloves and insulated tools.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5000

1910.335 A01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 7, 2016
Abate by
May 24, 2016
Penalty
Initial $5,000 · Current $0 Reduced
29 CFR 1910.335(a)(1)(i): Employees working in areas where there are potential electrical hazards shall be provided with, and shall use, electrical protective equipment that is appropriate for the specific parts of the body to be protected and for the work to be performed.   Note: Personal protective equipment requirements are contained in subpart I of this part.    a) On February 12, 2016 employees were not provided with rubber insulated gloves when starting the Hobart Mixer Cutter by using metal pliers to contact exposed energized electrical terminals.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5000

View Little Caesars Pizza's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341250447.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.