WHITESTONE, NY —
OSHA Inspection: DK SIGNS INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DK SIGNS INC. in 153-25 CROSS ISLAND PARKWAY, WHITESTONE, NY 11357 (NAICS 339950). OSHA activity number 341255560.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DK SIGNS INC.
- Site address
- 153-25 CROSS ISLAND PARKWAY
- City
- WHITESTONE
- State
- NY
- ZIP
- 11357
- Mailing
- 2520 BROOKLYN QUEENS EXPRESSWAY, WEST 1ST FLOOR, WOODSIDE, NY 11377
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339950
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.102 A01
- Issued
- Jun 22, 2016
- Abate by
- Jun 28, 2016
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: On or about February 17, 2016 Job site located at 153-25 Cross Island Parkway, Whitestone, NY 11357 Employees preforming work duties at job site used grinder to cut screw ends without eye protection. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2000
1926.300 B01
- Issued
- Jun 22, 2016
- Abate by
- Jul 5, 2016
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: On or about February 17, 2016 Job site located at 153-25 Cross Island Parkway, Whitestone, NY 11357 Employees preforming work duties at job site used grinder with a missing guard to cut screw ends. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2000
1926.403 E
- Issued
- Jun 22, 2016
- Abate by
- Jul 5, 2016
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.403(e): All splices and joints and free ends of conductors were not covered with insulation equivalent to that of the conductors or with an insulating device designed for the purpose: On or about February 17, 2016 Job site located at 153-25 Cross Island Parkway, Whitestone, NY 11357 Employees preforming work duties at job site used hammer drill with a spliced cord set. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2000
1926.404 F06
- Issued
- Jun 22, 2016
- Abate by
- Jun 28, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: On or about February 17, 2016 Job site located at 153-25 Cross Island Parkway, Whitestone, NY 11357 Employees preforming work duties at job site used flexible cord set to power hammer drill with missing ground pin, path to ground was not continuous. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $0
1926.1053 B01
- Issued
- Jun 22, 2016
- Abate by
- Jul 5, 2016
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: On or about February 17, 2016 - Job site located at 153-25 Cross Island Parkway, Whitestone, NY 11357 Ladder was not extended 3 feet above the upper landing surface while accessing roof. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2000
1926.1053 B04
- Issued
- Jun 22, 2016
- Abate by
- Jun 28, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed: On or about February 17, 2016 - Job site located at 153-25 Cross Island Parkway, Whitestone, NY 11357 Employees used an A-Frame ladder as a straight ladder to access roof while installing screws to hang store sign. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $0
1926.501 B10
- Issued
- Jun 22, 2016
- Abate by
- Jul 5, 2016
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest system: A.) On or about February 17, 2016 Job site located at 153-25 Cross Island Parkway, Whitestone, NY 11357 Employees were exposed to fall hazard greater than 10 feet while installing new store sign on roof. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19. B.) On or about February 17, 2016 Job site located at 153-25 Cross Island Parkway, Whitestone, NY 11357 Employees were exposed to fall hazard greater than 16 feet while accessing roof to install new store sign. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2000
More inspections at DK Signs INC.
View DK Signs INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339950)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341255560.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.