PHILADELPHIA, PA —
OSHA Inspection: CARDONE INDUSTRIES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CARDONE INDUSTRIES, INC. in 5660 RISING SUN AVENUE, PHILADELPHIA, PA 19120 (NAICS 336211). OSHA activity number 341262632.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARDONE INDUSTRIES, INC.
- Site address
- 5660 RISING SUN AVENUE
- City
- PHILADELPHIA
- State
- PA
- ZIP
- 19120
- Mailing
- 5660 RISING SUN AVENUE, PHILADELPHIA, PA 19120
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336211
- Employees
- 2430
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 B09
- Issued
- Aug 12, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $7,126 · Current $4,923 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue, or the end of the safety guard peripheral member at the top, exceeded one fourth inch. a) Jobsite: - R&R Power Brake Booster station - Employees were exposed to struck by and flying particle hazards while using a table grinder with a tongue guard set greater than 1/4 inch from the periphery. Noted on or about 2/18/16.
Recent events (2)
- — I (S) $4922.9
- — Z (S) $7126
1910.242 B
- Issued
- Aug 12, 2016
- Abate by
- Aug 24, 2016
- Penalty
- Initial $5,345 · Current $3,742 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. a) Jobsite: Plant #11, Drill C1#11513 - The drill press operator, and other employees, were exposed to flying debris hazards as the air hose used by the drill press operator to clean repaired calipers was not reduced to less than 30 psi. Observed on or about 2/18/16.
Recent events (2)
- — I (S) $3741.5
- — Z (S) $5345
1910.305 B01 II
- Issued
- Aug 12, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $8,908 · Current $6,236 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed. a) Jobsite: Caliper/Piston Assembly, Cell #23 work station, walkway in front of station - Employees were exposed to shock or electrocution hazards as the unused opening on the junction box was not effectively closed. Observed on or about 2/18/16.
Recent events (2)
- — I (S) $6235.6
- — Z (S) $8908
1910.132 D02
- Issued
- Aug 12, 2016
- Abate by
- Aug 24, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment had been performed through a written certification that identified the workplace evaluated; the person which certified that the evaluation had been performed; the date(s) of the hazard assessment; and, which identified the document as a certification of hazard assessment. a) Jobsite: The employer assessed and determined hazards were present at the workplace necessitating personal protective equipment, such as hearing, eye, and foot protection, without verifying the assessment was performed through a written certification. Noted on or about 2/18/16.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G02 III
- Issued
- Aug 12, 2016
- Abate by
- Aug 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws. 1) Jobsite: LOL Power Equipment Charging Area, Power Industrial Truck #1462 - Strain relief was not provided for the battery charging cable of the truck. Observed on or about 2/18/16. 2) Jobsite: LOL Power Equipment Charging Area, Powered Industrial Truck #L107 - Strain relief was not provided for the battery charging cable of the truck. Observed on or about 2/18/16.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Cardone Industries, INC.
View Cardone Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336211)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341262632.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.