HATBORO, PA —
OSHA Inspection: YARRINGTON MILLS CORP.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of YARRINGTON MILLS CORP. in 412 SOUTH WARMINSTER ROAD, HATBORO, PA 19040 (NAICS 313310). OSHA activity number 341271815.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- YARRINGTON MILLS CORP.
- Site address
- 412 SOUTH WARMINSTER ROAD
- City
- HATBORO
- State
- PA
- ZIP
- 19040
- Mailing
- 412 SOUTH WARMINSTER ROAD PO BOX 397, HATBORO, PA 19040
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 313310
- Employees
- 45
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.219 E03 I
- Issued
- Apr 20, 2016
- Penalty
- Initial $2,975 · Current $2,231 Reduced
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section. (a) Second Floor Knitting - On or about January 25, 2016, employees were exposed to hazards created by in-running nip points of inclined belts and pulleys on no less than six (6) Lamm Knitting Machines.
Recent events (2)
- — I (S) $2231.25
- — Z (S) $2975
1910.219 D01
- Issued
- Apr 20, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Second Floor Knitting - On or about January 25, 2016, employees were exposed to hazards created by in-running nip points of inclined belts and pulleys on no less than six (6) Lamm Knitting Machines.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F01
- Issued
- Apr 20, 2016
- Penalty
- Initial $2,975 · Current $2,231 Reduced
General-duty citation text
29 CFR 1910.219(f)(1): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii): (a) Knitting Department - On or about January 25, 2016, employees were exposed to hazards created by in-running nip points of gears on the front of the Steiger Knitting Machine Number 1812. (b) Knitting Department - On or about January 25, 2016, employees were exposed to hazards created by in-running nip points of gears on the front of the Steiger Knitting Machine Number 1813. (c) Knitting Department - On or about January 25, 2016, employees were exposed to hazards created by in-running nip points of gears on the front of the Steiger Knitting Machine Number 1824.
Recent events (2)
- — I (S) $2231.25
- — Z (S) $2975
1910.219 F03
- Issued
- Apr 20, 2016
- Penalty
- Initial $2,975 · Current $2,231 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: (a) Knitting Department - On or about January 25, 2016, employees were exposed to hazards created by in-running nip points of chain and sprockets on the rear of the ITM Model S-7 (SN 70307). (b) Knitting Department - On or about January 25, 2016, employees were exposed to hazards created by in-running nip points of chain and sprockets on the rear of the IKM Model S-12 (SN 35205). (c) Knitting Department - On or about January 25, 2016, employees were exposed to hazards created by in-running nip points of chain and sprockets on the rear of the IKM Model S-12 (SN 30505).
Recent events (2)
- — I (S) $2231.25
- — Z (S) $2975
1910.303 B02
- Issued
- Apr 20, 2016
- Abate by
- May 16, 2016
- Penalty
- Initial $1,785 · Current $1,339 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Finishing Department - On or about February 26, 2016, employees were exposed to potential shock hazards by the use of improper shop-made extension cords in that, metallic outlet boxes intended for permanent installation were connected to the end of flexible cables and used to power hand-held power equipment and tools.
Recent events (2)
- — I (S) $1338.75
- — Z (S) $1785
More inspections at Yarrington Mills Corp.
View Yarrington Mills Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 313310)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341271815.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.