MIDLAND, TX ·
OSHA Inspection: RANDCO INDUTRIES INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RANDCO INDUTRIES INC. in 4807 HWY 349 S, MIDLAND, TX 79706 (NAICS 238160). OSHA activity number 341275410.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RANDCO INDUTRIES INC.
- Site address
- 4807 HWY 349 S
- City
- MIDLAND
- State
- TX
- ZIP
- 79706
- Mailing
- 2702 W CR 130, MIDLAND, TX 79706
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 10
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Apr 18, 2016
- Abate by
- May 12, 2016
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents. Employees engaged in metal roofing work were exposed to struck-by hazards while using power drills to insert screws without eye protection.
Recent events (2)
- · I (S) $720
- · Z (S) $1200
1926.501 B01
- Issued
- Apr 18, 2016
- Abate by
- May 12, 2016
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. Employees engaged in metal roofing construction were exposed to fall hazards in excess of six feet.
Recent events (2)
- · I (S) $1680
- · Z (S) $2800
1926.602 C01 II
- Issued
- Apr 18, 2016
- Abate by
- May 12, 2016
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.602(c)(1)(ii): Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval: Employees engaged in metal roofing activities were exposed to caught in and fall hazards while riding in a job made man basket attached to the forks of a rough terrain forklift.
Recent events (2)
- · I (S) $1680
- · Z (S) $2800
1926.602 D
- Issued
- Apr 18, 2016
- Abate by
- May 12, 2016
- Penalty
- Initial $2,400 · Current $0 Reduced
General-duty citation text
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l). Employees engaged in framing operations were operating a fork lift without an operators certification to lift other employees working from an elevated platform and exposed to caught-in and fall hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $2400
1926.1053 B01
- Issued
- Apr 18, 2016
- Abate by
- May 12, 2016
- Penalty
- Initial $2,000 · Current $720 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed. Employees engaged in framing operations were exposed to fall hazards, in excess of nine feet, while using a ladder that was not extended at least three feet above the roof's landing.
Recent events (2)
- · I (S) $720
- · Z (S) $2000
More inspections in this industry (NAICS 238160)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341275410.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.