MEDFORD, MA ·
OSHA Inspection: HARBOR FREIGHT TOOLS, STORE #405
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of HARBOR FREIGHT TOOLS, STORE #405 in 30 COMMERCIAL STREET, MEDFORD, MA 02155 (NAICS 444130). OSHA activity number 341298057.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARBOR FREIGHT TOOLS, STORE #405
- Site address
- 30 COMMERCIAL STREET
- City
- MEDFORD
- State
- MA
- ZIP
- 02155
- Mailing
- 26541 AGOURA ROAD, CALABASAS, CA 91302
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 444130
- Employees
- 20
- Ownership type
- Private (A)
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- May 20, 2016
- Penalty
- Initial $7,000 · Current $3,000 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees while operating a defective Kelley dock plate leveler. Location: Loading dock On or about 2/29/16, employees attempted to lift the defective Kelley dock plate leveler by use of un-rated chains tied in a knot to the mast of the Komatsu, model #25 FG25ST-16 forklift. The dock plate became stuck and one employee attempted to lift up on the dock plate and then the dock plate came crashing down on the employee's two feet, breaking both big toes of each foot.
Recent events (2)
- · I (S) $3000
- · Z (S) $7000
1910.23 C01
- Issued
- May 20, 2016
- Abate by
- Jul 8, 2016
- Penalty
- Initial $4,400 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: Location: Loading docks On or about 3/3/16, the employer did not provide guardrails at their loading docks and exposed employees to fall hazards of up to 4-feet, 2-inches while loading and un-loading trucks, disposing of waste, cardboard, wooden pallets in the following areas; 1. Dock #1 - Trailer loading and un-loading - employees exposed to fall hazards of greater than 4-feet, 1 and 5/8-inches. 2. Dock #2 - Waste disposal - employees exposed to fall hazards of greater than 4-feet, 2-inches. 3. Dock #3 - Cardboard disposal - employees exposed to fall hazards of greater than 4-feet, 1-inch. 4. Dock #4 - Wood pallet disposal/recycle - employees exposed to fall hazards of greater than 4-feet.
Recent events (2)
- · I (S) $2000
- · Z (S) $4400
1910.157 C01
- Issued
- May 20, 2016
- Penalty
- Initial $2,805 · Current $0 Reduced
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: Location: Stockroom by back exit door On or about 3/3/16, the employer did not provide accessibility to the fire extinguisher due to being blocked by three large merchandise boxes.
Recent events (2)
- · I (S) $0
- · Z (S) $2805
1910.178 L03 I M
- Issued
- May 20, 2016
- Penalty
- Initial $7,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(3)(i)(M): Powered industrial truck operators did not receive initial training on truck-related topics including operating instructions, warnings, or precautions listed in the operators manual for the types of vehicles that the employees were being trained to operate. On or about 2/29/16, the employer did not receive training on truck-related topics including warnings and precautions labeled on the Komatsu 25, model FG-25ST-16 forklift, specifically pertaining to securing the dock board or bridge plate properly.
Recent events (2)
- · I (O) $2000
- · Z (S) $7000
1910.178 L04 II B
- Issued
- May 20, 2016
- Abate by
- Jul 8, 2016
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(ii)(B): Refresher training in relevant topics was not provided to the operator when the operator was involved in an accident or near-miss incident: Location: Loading dock On or about 2/29/16, the employer did not re-train the powered industrial truck operator involved in an accident with the Komatsu 25, model FG25ST-16 that was used to lift a damaged dock plate.
Recent events (2)
- · I (O) $0
- · Z (S) $7000
1910.184 C02
- Issued
- May 20, 2016
- Penalty
- Initial $7,000 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.184(c)(2): Makeshift device(s), knot(s) or bolt(s) were used to shorten sling(s) Location: Loading dock On or about 2/29/16, the employer used a chain as a sling and tied it around the mast of the Komatsu 25 FG25ST-16 forklift in a knot to lift up a dock plate and exposed employees to struck-by and crush-by hazards.
Recent events (2)
- · I (S) $3000
- · Z (S) $7000
1910.184 C09
- Issued
- May 20, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(c)(9): Employee(s) were not kept clear of load(s) suspended, or about to be lifted by sling(s) Location: Loading dock On or about 2/29/16, the employer used an un-rated chain as a sling and tied the chain in a knot around the mast of the Komatsu, model #25 FG25ST-16 forklift to lift up a defective dock plate. The dock plate became stuck and one employee attempted to lift up on the dock plate and is when the dock plate came crashing down on the employee's two feet, breaking both big toes of each foot.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.184 C14
- Issued
- May 20, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(c)(14): Sling(s) were used without having affixed and legible identification markings: Location: Loading dock On or about 2/29/16, the employer used a chain as a sling without a legible identification marking and capacity rating to lift a damaged loading dock plate.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1904.40 A
- Issued
- May 20, 2016
- Penalty
- Initial $1,100 · Current $0 Reduced
General-duty citation text
29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within the four business hours. Location: 30 Commercial Street, Medford, MA On or about 3/3/16, the employer failed to provide copies of the injury and illness records for calendar year 2015 and year-to-date 2016 to an authorized representative within four business hours.
Recent events (2)
- · I (O) $0
- · Z (O) $1100
More inspections in this industry (NAICS 444130)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341298057.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.