Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ASSOCIATED MACHINE CO., INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of ASSOCIATED MACHINE CO., INC. in 6540 N.W.35TH AVENUE, MIAMI, FL 33147 (NAICS 332999). OSHA activity number 341302537.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Associated Machine CO., INC. — free Get an email when a new federal OSHA severe-injury report for Associated Machine CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
6540 N.W.35TH AVENUE
City
MIAMI
State
FL
ZIP
33147
Mailing
6540 N.W.35TH AVENUE, MIAMI, FL 33147
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
40
Ownership type
A

4 citations on file for this inspection.

1910.24 D

Other-than-serious 1 instance 2 exposed
Issued
Aug 1, 2016
Abate by
Aug 25, 2016
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.24(d): A Stairway having four or more risers was not equipped with standard stair railing as specified in Paragraphs (d)(1)(I) through (v) of this section.    On or about March 22, 2016, at the above addressed jobsite, 6540 N.W. 35th Avenue, Miami, Florida 33147, a stairway leading from the shop floor to the mezzanine was not equipped with an intermediate rail on the open side of the stairway.
Recent events (3)
  • — R (O) $1400
  • — C (S) $2800
  • — Z (S) $2800

1910.212 B

Other-than-serious 1 instance 1 exposed
Issued
Aug 1, 2016
Abate by
Aug 25, 2016
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:    On or about March 4, 2016, at the above addressed jobsite, 6540 N.W. 35th Avenue, Miami, Florida, 33147, the pedestal of the Baldor Grinder, Cat. 8100W, serial number P9-93 was not bolted to the floor.
Recent events (3)
  • — R (O) $1400
  • — C (S) $2800
  • — Z (S) $2800

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 1, 2016
Abate by
Aug 25, 2016
Penalty
Initial $5,600 · Current $2,800 Reduced
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch    On or about March 4, 2016, at the above addressed jobsite, 6540 N.W. 35th Avenue, the employer did not provide adjustable tongue guard on the Baldor floor grinder having serial number P9-93. This exposed the operator of the grinder to stone wheel fragments in the event of an exploding wheel.    Associated Machine Co., Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard CRF 29 1910.215(b)(9), which was contained in OSHA inspection number 315355925, citation number 1, item number 2 and was affirmed as a final order on October 14,2011, with respect to a workplace located at 6540 N.S. 35th Avenue, Miami, Florida 33147.
Recent events (3)
  • — R (S) $2800
  • — C (R) $5600
  • — Z (R) $5600

1910.37 B05

Other-than-serious 1 instance 3 exposed
Issued
Aug 1, 2016
Abate by
Aug 25, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g. closet):  a) On or about March 4, 2016, at the above addressed jobsite, 6540 N.W. 35th Avenue, Miami, Florida, 33147, the doorway between the shop floor area and the tool room was not marked NOT an Exit.  b) On or about March 4, 2016, at the above addressed jobsite, 6540 N.W. 35th Avenue, Miami, Florida, 33147, the door in the tool room that did not lead to an exit and was not marked NOT an Exit.
Recent events (3)
  • — R (O) $0
  • — C (O) $0
  • — Z (O) $0

View Associated Machine CO., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341302537.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.