DELANO, PA —
OSHA Inspection: HABERLE STEEL INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HABERLE STEEL INC. in 98 INDUSTRIAL DRIVE, DELANO, PA 18220 (NAICS 332312). OSHA activity number 341303295.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HABERLE STEEL INC.
- Site address
- 98 INDUSTRIAL DRIVE
- City
- DELANO
- State
- PA
- ZIP
- 18220
- Mailing
- 1946 CHERRY LANE, SOUDERTON, PA 18964
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 6
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 4, 2016
- Abate by
- May 19, 2016
- Penalty
- Initial $2,380 · Current $2,380
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Fabrication area, Bay 2: The unused upper portion of the blade (above blade guide) and the lower wheel of the Hyd-Mech V-18 metal band saw were not guarded, as observed on or about March 7, 2016. Abatement Certification Required.
Recent events (3)
- — F (S) $2380
- — C (S) $2380
- — Z (S) $2380
1910.252 B02 III
- Issued
- Apr 4, 2016
- Abate by
- May 19, 2016
- Penalty
- Initial $1,785 · Current $0 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: a) Fabrication area: Workers and other persons adjacent to welding areas were exposed to welding rays and were not protected by screens or shields, as observed on or about March 7, 2016. Abatement Certification Required.
Recent events (3)
- — F (S) $0
- — C (S) $1785
- — Z (S) $1785
1910.37 B02
- Issued
- Apr 4, 2016
- Abate by
- May 19, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) Fabrication area: The emergency exit door, located along the east wall of Bay 1, was not marked by an "EXIT" sign, as observed on or about March 7, 2016. Abatement Certification Required.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.147 C07 IV
- Issued
- Apr 4, 2016
- Abate by
- May 19, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: a) Fabrication area: The employer did not certify that employee training had been accomplished, on or about March 7, 2016. Abatement Certification Required.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Haberle Steel INC.
View Haberle Steel INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341303295.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.