Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CENTER STAR CONSTRUCTION SERVICES LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of CENTER STAR CONSTRUCTION SERVICES LLC in 377 ROUTE 17 SOUTH, HASBROUCK HEIGHTS, NJ 07604 (NAICS 236220). OSHA activity number 341318541.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Center Star Construction Services LLC — free Get an email when a new federal OSHA severe-injury report for Center Star Construction Services LLC is published. One employer, no account, unsubscribe in one click.
Site address
377 ROUTE 17 SOUTH
City
HASBROUCK HEIGHTS
State
NJ
ZIP
07604
Mailing
13 BOTANY VILLAGE, CLIFTON, NJ 07011
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
25
Ownership type
A

7 citations on file for this inspection.

1903.19 D01

Other-than-serious 1 instance 25 exposed
Issued
Jan 24, 2017
Abate by
Mar 13, 2017
Penalty
Initial $406 · Current $406
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.   The employer, Center Star Construction, LLC, did not submit to the agency documents demonstrating that abatement is complete for each serious violation for which the Agency indicates in the citation that such abatement documentation is required, on our about January 19th, 2017.
Recent events (1)
  • — Z (O) $406

1910.134 C01

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 29, 2016
Abate by
Sep 2, 2016
Penalty
Initial $1,200 · Current $1,200
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (Construction Reference 1926.103)  a) 377 Route 17 South, Hasbrouck Heights, NJ 07604  An employee wore a tight fitting half face respirator while conducting concrete floor grinding for the purpose of leveling the floor. The floor contained 20% crystalline silica, and engineering controls were not in place, despite the presence of wet engineering controls integrated into the machine. The employer did not establish a written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i)-(ix), on or about March 9, 2016.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $1200

1910.134 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 29, 2016
Abate by
Sep 2, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a) 377 Route 17 South, Hasbrouck Heights, NJ 07604  The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace. An employee wore a tight fitting half face respirator while conducting concrete floor grinding for the purpose of leveling the floor. The floor contained 20% crystalline silica, and engineering controls were not in place, despite the presence of wet engineering controls integrated into the machine. The employer did not conduct medical evaluations, on or about March 9, 2016.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $0

1910.134 H02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 29, 2016
Abate by
Sep 2, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or  were not packed or stored to prevent deformation of the facepiece and exhalation valve:  a) 377 Route 17 South, Hasbrouck Heights, NJ 07604  The employer did not ensure that respirators were stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or were not packed or stored to prevent deformation of the facepiece and exhalation valve. An employee wore a tight fitting half face respirator while conducting concrete floor grinding for the purpose of leveling the floor. The floor contained 20% crystalline silica, and engineering controls were not in place, despite the presence of wet engineering controls integrated into the machine. Employees did not properly store respirators, on or about March 9, 2016.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $0

1910.134 K

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 29, 2016
Abate by
Sep 2, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary:  a) 377 Route 17 South, Hasbrouck Heights, NJ 07604  The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary. An employee wore a tight fitting half face respirator while conducting concrete floor grinding for the purpose of leveling the floor. The floor contained 20% crystalline silica, and engineering controls were not in place, despite the presence of wet engineering controls integrated into the machine. The employee was not trained on the proper use of the tight fitting respirator, on or about March 9, 2016.   Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $0

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 29, 2016
Abate by
Sep 2, 2016
Penalty
Initial $2,000 · Current $2,000
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59)  a) 377 Route 17 South, Hasbrouck Heights, NJ 07604  Employees were exposed to the hazards associated with crystalline silica while grinding concrete floors and the employer did not develop and implement a written hazard communication program, on or about March 9, 2016.   Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d)
Recent events (1)
  • — Z (S) $2000

1910.1200 H01

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 29, 2016
Abate by
Sep 2, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59)  a) 377 Route 17 South, Hasbrouck Heights, NJ 07604  The employer did not ensure that employees were provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. Employees were exposed to the hazards associated with crystalline silica while grinding concrete floors and the employer did not train employees on the hazards of crystalline silica, on or about March 9, 2016.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d)
Recent events (1)
  • — Z (S) $0

View Center Star Construction Services LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341318541.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.