ORISKANY, NY ·
OSHA Inspection: SEIFERT GRAPHICS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SEIFERT GRAPHICS, INC. in 6133 JUDD ROAD, ORISKANY, NY 13424 (NAICS 323111). OSHA activity number 341320216.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SEIFERT GRAPHICS, INC.
- Site address
- 6133 JUDD ROAD
- City
- ORISKANY
- State
- NY
- ZIP
- 13424
- Mailing
- 6133 JUDD ROAD, ORISKANY, NY 13424
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 20
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.24 H
- Issued
- Apr 27, 2016
- Abate by
- Jun 14, 2016
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.24(h): Standard railings were not provided on the open sides of all exposed stairways and stair platforms: a) Digital Printing Area, on or about 3/11/16: The stairway to the mezzanine area had a railing that was not provided with a midrail on the open sides.
Recent events (2)
- · I (S) $1260
- · Z (S) $2100
1910.36 D01
- Issued
- Apr 27, 2016
- Abate by
- May 9, 2016
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: a) Screen Production Area, on or about 3/11/16: The emergency exit door at the area was locked from the inside with a dead bolt.
Recent events (2)
- · I (S) $1260
- · Z (S) $2100
1910.147 C04 I
- Issued
- Apr 27, 2016
- Abate by
- Jul 7, 2016
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Screen Production Area, on or about 3/11/16: The employer did not have documented energy control procedures to utilize for the control of potentially hazardous energy for employees who perform servicing and/or maintenance on various machinery or equipment such as but not limited to: Crest Clam Shell Press, M & R Renegade Press, and two M & R Saturn Press.
Recent events (2)
- · I (S) $2100
- · Z (S) $3500
1910.151 C
- Issued
- Apr 27, 2016
- Abate by
- Jun 14, 2016
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) Screen Production Area, on or about 3/11/2016: Employees were using hazardous chemicals such as but not limited to Stencil Remover Concentrate to remove paint from stencils and an eye wash was not available at the facility.
Recent events (2)
- · I (S) $1680
- · Z (S) $2800
1910.213 D01
- Issued
- Apr 27, 2016
- Abate by
- May 9, 2016
- Penalty
- Initial $3,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Shipping/Receiving Area Tunnel #2, on or about 3/11/2016: Employee used a Delta Unisaw to cut wood in order to build a bench and the saw was not provided with a guard protecting the employee from the blade.
Recent events (2)
- · I (S) $0
- · Z (S) $3500
1910.304 G05
- Issued
- Apr 27, 2016
- Abate by
- May 9, 2016
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a) Shipping/Receiving Area Tunnel #2, on or about 3/11/2016: Employee used a Delta Unisaw to cut wood to build a bench which had its electrical connector grounding prong missing; employee was exposed to an electric shock.
Recent events (2)
- · I (S) $0
- · Z (S) $2800
More inspections in this industry (NAICS 323111)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341320216.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.