OSHA Inspection: DALTON DIECUTTING SERVICE INC.

Issued

2016-09-08 00:00:00

Abate by

2016-11-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    a) 607 North Elm Street, Dalton, Georgia: Production Area: - The employer did not conduct periodic inspections of their energy control procedures to ensure that the requirements of this standard were met where equipment and machines were serviced.

Issued

2016-09-08 00:00:00

Abate by

2016-11-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i)(C): Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected:     a) 607 North Elm Street, Dalton, Georgia: Production Area: - The employer did not conduct a periodic inspection that includes a review of each authorized employee as to their responsibilities under the energy control procedure.

Issued

2016-09-08 00:00:00

Abate by

2016-11-20 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:    a) 607 North Elm Street, Dalton, Georgia: In the production area; The employer allowed employees to operate powered industrial trucks without evaluation within the 36 months as prescribed, exposing employee to struck by/crushed by hazards.

Issued

2016-09-08 00:00:00

Abate by

2016-11-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:    a) 607 North Elm Street, Dalton, Georgia, Production Floor; Employees were required to work with chemicals such as, but not limited to, multiple color dye's, glues, solvent, Bleach and unleaded gas  The employer did not provide training on the new label elements and safety data sheet format.