Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FRAMETECH LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FRAMETECH LLC in 6707 WINEMACK LOOP, DUBLIN, OH 43016 (NAICS 238130). OSHA activity number 341334225.

Watch Frametech LLC — free Get an email when a new federal OSHA severe-injury report for Frametech LLC is published. One employer, no account, unsubscribe in one click.
Establishment
FRAMETECH LLC
Site address
6707 WINEMACK LOOP
City
DUBLIN
State
OH
ZIP
43016
Mailing
7536 INDIAN CREEK DR., POWELL, OH 43065
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
8
Ownership type
A

2 citations on file for this inspection.

1926.501 B13

Repeat Gravity 5 1 instance 1 exposed
Issued
Apr 12, 2016
Abate by
Apr 22, 2016
Penalty
Initial $11,000 · Current $5,500 Reduced
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502. Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.  a. On or before March 17, 2016, where an employee was working on the roof on the porch of the house, fall protection was not used, thereby exposing the employee to a 10 foot 11 inch fall hazard.  Frametech was previously cited for a Repeat violation of this occupational safety and health standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 607599, citation number 1, item number 1 and was affirmed as a final order on September 26, 2012, with respect to a workplace located at 1429 Little Bear Loop, Lewis Center, Ohio, 43035.  Frametech was previously cited for a violation of this occupational safety and health standard  29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 329517, citation number 1, item number 3 and was affirmed as a final order on May 30, 2012, with respect to a workplace located at 10045 Corona Lane, Plain City, OH 43064.
Recent events (2)
  • — I (R) $5500
  • — Z (R) $11000

1926.1053 B01

Repeat Gravity 5 1 instance 2 exposed
Issued
Apr 12, 2016
Abate by
Apr 22, 2016
Penalty
Initial $8,800 · Current $4,400 Reduced
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.   a. On or before March 17, 2016, where an employee was working on the roof on the porch of the house, the ladder used to access the roof did not extend at least 3 feet above the landing surface, thereby exposing the employee to a 10 foot 11 inch fall hazard.  Frametech was previously cited for a Repeat violation of this occupational safety and health standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 607599, citation number 1, item number 2 and was affirmed as a final order on September 26, 2012, with respect to a workplace located at 1429 Little Bear Loop, Lewis Center, Ohio, 43035.  Frametech was previously cited for a violation of this occupational safety and health standard  29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 329517, citation number 1, item number 5 and was affirmed as a final order on May 30, 2012, with respect to a workplace located at 10045 Corona Lane, Plain City, OH 43064.
Recent events (2)
  • — I (R) $4400
  • — Z (R) $8800

View Frametech LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341334225.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.