OSHA Inspection: THE VINTAGE STATION, INC.

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $2,400 · Current $1,200 Reduced

General-duty citation text

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:    (a) On or about 03/22/2016 - Loading dock, employees working along the edge of the loading dock are exposed to the hazards of having materials stacked on the docks falling onto them, as well as to, falls onto items such as steel rods and wooden pallets that are stored adjacent to the dock.

Issued

Jun 24, 2016

Abate by

Jul 7, 2016

Penalty

Initial $2,400 · Current $1,200 Reduced

General-duty citation text

29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:     (a) On or about 03/22/2016 - Woodworking shop, a Grizzly table saw, serial #045114, was not guarded.      (b) On or about 03/22/2016 - Woodworking shop, a Delta table saw, serial #15E032878, was not guarded.

Issued

Jun 24, 2016

Abate by

Jul 7, 2016

Penalty

Initial $1,600 · Current $800 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch:    (a) On or about 03/22/2016 - Tool room, the work rest of a Delta 6" Thin-Line Bench Grinder, model #23-660, was adjusted at 1 1/2 inches from the wheel.

Issued

Jun 24, 2016

Abate by

Jul 7, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:  (a) On or about 03/22/2016 - Tool room, a Delta 6" Thin-Line bench grinder, model #23-660, was not equipped with a tongue guard on the left side.  (b)  On or about 03/22/2016 - Tool room, a Sears  1/2 HP bench grinder, model #397.1949, was not equipped with tongue guards.

Issued

Jun 24, 2016

Abate by

Jul 7, 2016

Penalty

Initial $1,200 · Current $600 Reduced

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    (a) On or about 03/22/2016 - Woodworking Shop, a power strip connected to a DEWALT power saw was found being used as a permanent fixture.

Issued

Jun 24, 2016

Abate by

Jul 7, 2016

Penalty

Initial $400 · Current $200 Reduced

General-duty citation text

29 CFR 1910.141(a)(3)(i): Places of employment were not kept clean to the extent that the nature of the work allowed:    (a) On or about 03/22/2016 - Tool room, the employee restroom was not kept clean and free of clutter.