GAUTIER, MS —
OSHA Inspection: SOUTHEASTERN CONTAINER
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SOUTHEASTERN CONTAINER in 4205 BEASLEY ROAD, GAUTIER, MS 39553 (NAICS 811310). OSHA activity number 341353365.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTHEASTERN CONTAINER
- Site address
- 4205 BEASLEY ROAD
- City
- GAUTIER
- State
- MS
- ZIP
- 39553
- Mailing
- 18914 DALEWOOD CIRCLE, ROBERTSDALE, AL 36567
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 6
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.243 C01
- Issued
- May 13, 2016
- Abate by
- May 25, 2016
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard (s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4) (a)Repair Area - On or about March 23, 2016 employees were using a Dewalt Hand Grinder without a safety guard.
Recent events (1)
- — Z (S) $1600
1910.253 B02 II
- Issued
- May 13, 2016
- Abate by
- May 25, 2016
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders were not located where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons: (a) Repair Area - On or about March 23, 2016 oxygen and acetylene in storage together were secured by a loose flexible cord tied to a medal frame and running around the bottom third of the oxygen cylinders.
Recent events (1)
- — Z (S) $2400
1910.253 B04 III
- Issued
- May 13, 2016
- Abate by
- May 25, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet: (a) Repair Area - On or about March 23, 2016 oxygen and acetylene was stored together.
Recent events (1)
- — Z (S) $0
1910.254 D09 III
- Issued
- May 13, 2016
- Abate by
- May 23, 2016
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replaced: (a) Repair Area On or about March 23, 2016 the welding electrode cable lead were damaged, frayed and had exposed bare wire thereby exposing employees to the hazard of contacting an energized source.
Recent events (1)
- — Z (S) $2000
1910.1200 E01
- Issued
- May 13, 2016
- Abate by
- Jun 6, 2016
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Repair Area - On or about March 23, 2016 the employer had not established or implemented a written Hazard Communication Program.
Recent events (2)
- — Z $6413
- — Z (S) $1600
1910.305 G02 III
- Issued
- May 13, 2016
- Abate by
- May 23, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: (a)Work Area - On or about March 23, 2016 the electrical cord to the Idealarc 250 Welding Machine did not allow for stain relief.
Recent events (1)
- — Z (O) $0
1910.334 A02 I
- Issued
- May 13, 2016
- Abate by
- May 23, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket): (a) Repair Area - On or about March 23, 2016 damaged extension cord had not been inspected before use.
Recent events (1)
- — Z (O) $0
More inspections at Southeastern Container
View Southeastern Container's full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341353365.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.