SAINT PETERSBURG, FL —
OSHA Inspection: STABIL CONCRETE PRODUCTS, LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STABIL CONCRETE PRODUCTS, LLC. in 4451 8TH AVE SOUTH, SAINT PETERSBURG, FL 33711 (NAICS 327390). OSHA activity number 341362051.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STABIL CONCRETE PRODUCTS, LLC.
- Site address
- 4451 8TH AVE SOUTH
- City
- SAINT PETERSBURG
- State
- FL
- ZIP
- 33711
- Mailing
- 4451 8TH AVE SOUTH, SAINT PETERSBURG, FL 33711
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 50
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- May 5, 2016
- Abate by
- May 11, 2016
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. In the welding shop, employees were exposed to a struck by hazard, in that, that the JET JDP-20MF, SN# 345470 drill press did not have a cup guard while used to drill holes in metal parts, on or about 03/29/2016.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.212 B
- Issued
- May 5, 2016
- Abate by
- May 11, 2016
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a. In the welding shop, employees were exposed to a struck by hazard, in that, that the JET JDP-20 MF, SN# 354170 drill press was not anchored to prevent moving or walking while in use, on or about 03/29/2016. b. In the welding shop, employees were exposed to a struck by hazard, in that, the JET 8 inch abrasive wheel grinder was not anchored to prevent moving or walking while in use, on or about 03/29/2016.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.215 A04
- Issued
- May 5, 2016
- Abate by
- May 11, 2016
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a. In the welding shop, employees were exposed to a struck by hazard, in that, while de-burring metal parts and sharpening welding tools the JET 8 inch abrasive wheel grinder's work rest was at 1/4 of an inch, on or about 03/29/2016.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
1910.132 D02
- Issued
- May 5, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: a. At the establishment, the employer did have a written assessment of the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE), but it had not been certified, on or about 03/29/2016.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C04
- Issued
- May 5, 2016
- Abate by
- Jun 22, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4): Procedures were not developed, documented, and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. At the establishment, the employer did not have a written lock out tag out program to instruct employees on the control of potentially hazardous energy when engaged in maintenance on equipment, on or about 03/29/2016.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Stabil Concrete Products, LLC.
View Stabil Concrete Products, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341362051.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.