TALLADEGA, AL —
OSHA Inspection: LAINIERE DE PICARDIE INCORPORATED
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of LAINIERE DE PICARDIE INCORPORATED in 355 JACKSON STREET, TALLADEGA, AL 35160 (NAICS 313310). OSHA activity number 341374734.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LAINIERE DE PICARDIE INCORPORATED
- Site address
- 355 JACKSON STREET
- City
- TALLADEGA
- State
- AL
- ZIP
- 35160
- Mailing
- 997 LENOX DRIVE BUILDING 3, LAWRENCE, NJ 08648
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 313310
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 22, 2016
- Abate by
- Oct 4, 2016
- Penalty
- Initial $12,471 · Current $8,730 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): : The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to crushed-by and/or struck-by hazards: (a) On or about 04/04/2016 - Facility, an employee operating the Nissan Enduro 30 forklift was not utilizing the seat belt.
Recent events (2)
- — I (S) $8729.7
- — Z (S) $12471
1910.147 C01
- Issued
- Sep 22, 2016
- Abate by
- Oct 19, 2016
- Penalty
- Initial $4,988 · Current $3,492 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) On or about 04/04/2016 - Facility, the employer had not established a lockout / tagout program for employees performing servicing and repair work on equipment, such as, but not limited to,the Weft insertion knitting machine, Napper machine, and Fusible machine.
Recent events (2)
- — I (S) $3491.6
- — Z (S) $4988
1910.178 L01 I
- Issued
- Sep 22, 2016
- Abate by
- Oct 19, 2016
- Penalty
- Initial $4,988 · Current $3,492 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) On or about 04/04/2016 - Facility, forklift operators had not been trained and evaluated.
Recent events (2)
- — I (S) $3491.6
- — Z (S) $4988
1910.219 D01
- Issued
- Sep 22, 2016
- Abate by
- Oct 19, 2016
- Penalty
- Initial $2,850 · Current $1,995 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) On or about 04/04/2016 - Finishing area, Merrow sewing machine, serial #74240, the pulley was not guarded. (b) On or about 04/04/2016 - Finishing area, Merrow sewing machine, serial #160665, the pulley was not guarded. (c) On or about 04/04/2016 - Finishing area, Merrow sewing machine, serial #(illegible), the pulley was not guarded.
Recent events (2)
- — I (S) $1995
- — Z (S) $2850
1910.219 E03
- Issued
- Sep 22, 2016
- Abate by
- Oct 19, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3): Vertical and inclined belts were not enclosed by a guard conforming to the standards in paragraphs specified in 29 CFR 1910.219(m) and (o): (a) On or about 04/04/2016 - Finishing area, Merrow sewing machine, serial #74240, the inclined belt was not guarded. (b) On or about 04/04/2016 - Finishing area, Merrow sewing machine, serial #160665, the inclined belt was not guarded. (c) On or about 04/04/2016 - Finishing area, Merrow sewing machine, serial #(illegible), the inclined belt was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F03
- Issued
- Sep 22, 2016
- Abate by
- Oct 4, 2016
- Penalty
- Initial $2,850 · Current $1,995 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven 7 feet or less above floors or platforms were not enclosed: (a) on or about 04/04/2016 - Finishing area, Fusible machine, the chain and sprocket were not guarded.
Recent events (2)
- — I (S) $1995
- — Z (S) $2850
More inspections at Lainiere DE Picardie Incorporated
View Lainiere DE Picardie Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 313310)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341374734.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.