Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: GF SOLUTIONS, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of GF SOLUTIONS, LLC in 126 MERRIMACK ST, SUITE 3, METHUEN, MA 01844 (NAICS 311412). OSHA activity number 341375848.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch GF Solutions, LLC for free Get an email when a new federal OSHA severe-injury report for GF Solutions, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
GF SOLUTIONS, LLC
Site address
126 MERRIMACK ST, SUITE 3
City
METHUEN
State
MA
ZIP
01844
Mailing
126 MERRIMACK STREET, METHUEN, MA 01844
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311412
Employees
18
Ownership type
Private (A)

6 citations on file for this inspection.

1910.36 D01

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 14, 2016
Penalty
Initial $1,200 · Current $800 Reduced
29 CFR 1910.36(d)(1): Employees must be able to open an exit route door from the inside at all times without keys, tools, or special knowledge. A device such as a panic bar that locks only from the outside is permitted on exit discharge doors.    (a) Location - Loading dock area of 126 Merrimack St, Methuen, MA 01844     On or about 3/28/2016, the employer does not protect employees by ensuring that all exit routes can be opened by employees from the inside at all times, without keys, tools or special knowledge.
Recent events (2)
  • · I (S) $800
  • · Z (S) $1200

1910.151 C

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 14, 2016
Abate by
Aug 18, 2016
Penalty
Initial $2,000 · Current $500 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    (a) Location - 126 Merrimack St, Methuen, MA 01844    On or about 3/28/16, the employer failed to provide an emergency eye wash station for employees who maintain fluid levels in fork truck batteries.
Recent events (2)
  • · I (S) $500
  • · Z (S) $2000

1910.178 L01 II

Serious Gravity 10 1 instance 2 exposed
Issued
Jul 14, 2016
Abate by
Aug 18, 2016
Penalty
Initial $2,800 · Current $800 Reduced
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required.    (a) Location - 126 Merrimack St, Methuen, MA 01844    On or about 3/28/2016, the employer did not ensure their employees had successfully completed training prior to operating powered industrial trucks.
Recent events (2)
  • · I (S) $800
  • · Z (S) $2800

1910.178 Q07

Serious Gravity 10 1 instance 2 exposed
Issued
Jul 14, 2016
Abate by
Aug 18, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(7): Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected.  (a) Location - 126 Merrimack St, Methuen, MA 01844  On or about 3/28/2016, the employer did not ensure their employees had examined powered industrial trucks prior to operating them.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.212 A01

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 14, 2016
Abate by
Nov 18, 2016
Penalty
Initial $1,200 · Current $800 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.    (a) Location - 126 Merrimack St, Methuen, MA 01844    On or about 3/28/2016, the employer failed to guard rotating parts on a Hobart mixer.
Recent events (2)
  • · I (S) $800
  • · Z (S) $1200

1910.242 B

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 14, 2016
Abate by
Aug 18, 2016
Penalty
Initial $1,200 · Current $800 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 PSI:      (a) Location - 126 Merrimack St, Methuen, MA 01844    On or about 3/28/16, the employer failed to reduce air for cleaning to less than 30 PSI.
Recent events (2)
  • · I (S) $800
  • · Z (S) $1200

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341375848.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.