HOMESTEAD, FL —
OSHA Inspection: BULLSEYE COATING AND BLASTING CORP.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of BULLSEYE COATING AND BLASTING CORP. in SEWER TREATMENT AREA, REDLAND MIDDLE SCHOOL 16001 SW 248TH ST, HOMESTEAD, FL 33031 (NAICS 332812). OSHA activity number 341409506.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BULLSEYE COATING AND BLASTING CORP.
- Site address
- SEWER TREATMENT AREA, REDLAND MIDDLE SCHOOL 16001 SW 248TH ST
- City
- HOMESTEAD
- State
- FL
- ZIP
- 33031
- Mailing
- 2301 SW 57TH TERRACE, WEST PARK, FL 33023
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332812
- Employees
- 2
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 C01
- Issued
- Jul 28, 2016
- Abate by
- Aug 23, 2016
- Penalty
- Initial $3,240 · Current $1,944 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: On or about 04/19/2016 , at the address jobsite located at 16001 SW 248th St, Homestead, FL 33031, the employer did not establish and implement a written respiratory protection program for employees exposed to silica dust and required to wear: 1. A tight fitting respirator 3M Model 8210 . 2. A tight fitting respirator Gerson, Model 8100. 3. An air-supplied helmet.
Recent events (2)
- — I (S) $1944
- — Z (S) $3240
1910.134 E01
- Issued
- Jul 28, 2016
- Abate by
- Aug 23, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: On or about 04/19/2016 , at the address jobsite located at 16001 SW 248th St, Homestead, FL 33031, the employer did not provide a medical evaluation for employees who had to wear: 1. A tight fitting respirator 3M Model 8210 . 2. A tight fitting respirator Gerson, Model 8100. 3. An air-supplied helmet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Jul 28, 2016
- Abate by
- Aug 23, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: (Construction Reference 1926.103). On or about 04/19/2016 , at the address jobsite located at 16001 SW 248th St, Homestead, FL 33031, the employer did not provide annual fit-test for employees who had to wear: 1. A tight fitting respirator 3M Model 8210 . 2. A tight fitting respirator Gerson, Model 8100. 3. An air-supplied helmet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K01 I
- Issued
- Jul 28, 2016
- Abate by
- Aug 23, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(1)(i): The employer did not ensure that each employee could demonstrate knowledge of why the respirator was necessary and how improper fit, usage, or maintenance could compromise the protective effect of the respirator: (Construction Reference 1926.103)(a). On or about 04/19/2016 , at the address jobsite located at 16001 SW 248th St, Homestead, FL 33031, the employer did not ensure that each employee could demonstrate knowledge of why the respirator was necessary and how improper fit, usage, or maintenance could compromise the protective effect of the respirator; for employees who had to wear: 1. A tight fitting respirator 3M Model 8210 . 2. A tight fitting respirator Gerson, Model 8100 with combine filters for dust N95 and organic vapors. 3. An air-supplied helmet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Bullseye Coating and Blasting Corp.
View Bullseye Coating and Blasting Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 332812)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341409506.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.