HELENA, MT —
OSHA Inspection: D & D RV CENTER
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D & D RV CENTER in 806 STANLEY STREET, HELENA, MT 59601 (NAICS 441210). OSHA activity number 341410777.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D & D RV CENTER
- Site address
- 806 STANLEY STREET
- City
- HELENA
- State
- MT
- ZIP
- 59601
- Mailing
- 806 STANLEY STREET, HELENA, MT 59601
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441210
- Employees
- 26
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.213 D01
- Issued
- Aug 30, 2016
- Abate by
- Sep 26, 2016
- Penalty
- Initial $6,236 · Current $3,118 Reduced
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) South Shop: On or about April 19, 2016 and at times prior, employees were exposed to amputation hazards while re-framing trailers with an unguarded Delta Shop Master, 10 inch Bench Saw (model TS200LS, serial # 230600Q).
Recent events (2)
- — I (S) $3118
- — Z (S) $6236
1910.215 A04
- Issued
- Aug 30, 2016
- Abate by
- Sep 26, 2016
- Penalty
- Initial $3,180 · Current $1,590 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) North Shop: On or about April 19, 2016 and at times prior, employees were exposed to caught in hazards while performing grinding operations on a Craftsman Professional 8in Bench Grinder, (½ HP, 6.0 Amp, model 152.211080, serial # 0231-W), with the work-rest adjusted to approximately 3/8 inch.
Recent events (2)
- — I (S) $1590
- — Z (S) $3180
1910.303 F02
- Issued
- Aug 30, 2016
- Abate by
- Sep 26, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(2): Services, feeders, and branch circuits. Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident: a) South Shop: On or about April 19, 2016 and at times prior, employees were exposed to the hazards associated with not being able to correctly identify the electrical disconnect switches to de-energize circuits in the event of an emergency.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01 I
- Issued
- Aug 30, 2016
- Abate by
- Sep 26, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i): Sufficient access and working space was not provided for circuit breaker panels to permit ready and safe operation and maintenance. a) North Shop: On or about April 19, 2016 and at times prior, the employer failed to maintain access and working space around the electrical panels. A bolt bin was installed in front of the breaker box. b) South Shop: On or about April 19, 2016 and at times prior, the employer failed to maintain access and working space around the electrical panels. Welders were stored in front of the breaker box.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at D & D RV Center
View D & D RV Center's full OSHA safety record →
More inspections in this industry (NAICS 441210)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341410777.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.