SUTTON, NE —
OSHA Inspection: CENTRAL NEBRASKA WOOD PRESERVERS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CENTRAL NEBRASKA WOOD PRESERVERS, INC. in 1098 E MAPLE, SUTTON, NE 68979 (NAICS 321114). OSHA activity number 341414159.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CENTRAL NEBRASKA WOOD PRESERVERS, INC.
- Site address
- 1098 E MAPLE
- City
- SUTTON
- State
- NE
- ZIP
- 68979
- Mailing
- PO BOX 630, SUTTON, NE 68979
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321114
- Employees
- 20
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.147 C04 I
- Issued
- Aug 1, 2016
- Abate by
- Sep 16, 2016
- Penalty
- Initial $1,700 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: The employer is failing to ensure that the lockout procedures used by employees to service equipment were developed for locking out equipment, including, but not limited to, the Sign-Post Drill. Abatement certification is required for this violation. The abatement certification sheet is enclosed with the citations.
Recent events (2)
- — I (S) $1190
- — Z (S) $1700
1910.212 A01
- Issued
- Aug 1, 2016
- Penalty
- Initial $1,700 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: The employer is failing to ensure that adequate machine guarding was provided on machinery including, but not limited to: a) OLSEN horizontal bandsaw the unused portion of the blade was not adequately guarded. b) Craftsman 15-inch Drill Press unguarded drill bit.
Recent events (2)
- — I (S) $1190
- — Z (S) $1700
1910.215 A04
- Issued
- Aug 1, 2016
- Penalty
- Initial $1,360 · Current $952 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: The employer is failing to ensure that the opening between the work rest and abrasive wheel did not exceeded one-eighth inch on the 8 Delta bench grinder. The opening was one-fourth inch.
Recent events (2)
- — I (S) $952
- — Z (S) $1360
1910.215 B09
- Issued
- Aug 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: The employer is failing to ensure that the opening for a tongue guard on the Delta 8 bench grinder was being used to ensure that it was adjusted to a 1/4 inch opening. The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top opening was 2 inches.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Aug 1, 2016
- Penalty
- Initial $1,700 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): The employer failed to ensure that pulleys were adequately guarded on the OLSEN horizontal bandsaw in the Maintenance Shop.
Recent events (2)
- — I (S) $1190
- — Z (S) $1700
1910.219 E01 I
- Issued
- Aug 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): The employer failed to ensure that inclined belt were adequately guarded on the OLSEN horizontal bandsaw in the Maintenance Shop.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV
- Issued
- Aug 1, 2016
- Penalty
- Initial $1,360 · Current $952 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and cables were used for purposes prohibited by subparagraph (D) of this paragraph where the employer did not ensure that flexible cord was not attached to a building surface: The employer is failing to ensure that a flexible cord was not attached to a building surface on the S4S Line.
Recent events (2)
- — I (S) $952
- — Z (S) $1360
1910.37 B02
- Issued
- Aug 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): The employer did not ensure that each exit was clearly visible and marked by a sign reading Exit : The employer is failing to ensure that a door used for exiting the Maintenance Shop was not marked with a sign reading Exit.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Central Nebraska Wood Preservers, INC.
View Central Nebraska Wood Preservers, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321114)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341414159.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.