OSHA Inspection: COASTLINE MARINE, LLC

Issued

Jul 28, 2016

Abate by

Aug 23, 2016

Penalty

Initial $1,360 · Current $816 Reduced

General-duty citation text

29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:      At the shop section; employees were not protected from the rays of the Tungsten Inert Gas (TIG) welding, exposing employees to eye injuries.

Issued

Jul 28, 2016

Abate by

Aug 23, 2016

Penalty

Initial $1,700 · Current $1,020 Reduced

General-duty citation text

29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):      In the welding section; employees operated a Miller Syncrowave 250 welding machine without a side cover plate, exposing employees to electrical hazards.

Issued

Jul 28, 2016

Penalty

Initial $1,700 · Current $1,020 Reduced

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws:      In the fabrication section; an extension cord was not equipped with strain relief, exposing employees to electrical hazards.