HEBRON, OH ·
OSHA Inspection: RR DONNELLEY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of RR DONNELLEY in 190 MILLIKEN DRIVE, HEBRON, OH 43025 (NAICS 541860). OSHA activity number 341424976.
What this inspection record means
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch RR Donnelley for free
Get an email when a new federal OSHA severe-injury report for RR Donnelley is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- RR DONNELLEY
- Site address
- 190 MILLIKEN DRIVE
- City
- HEBRON
- State
- OH
- ZIP
- 43025
- Mailing
- 190 MILLIKEN DRIVE, HEBRON, OH 43025
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541860
- Employees
- 264
- Ownership type
- Private (A)
Citations
2 citations on file for this inspection.
1910.147 F03 I
- Issued
- Aug 1, 2016
- Abate by
- Sep 3, 2016
- Penalty
- Initial $6,300 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(i): When servicing and/or maintenance is performed by a crew, craft, department or other group, they shall utilize a procedure which affords the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device. a. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; an employee was exposed to ingoing nip points/caught-in hazards during the rewebbing process for Press N-19. The employee's finger was caught in the press rollers during the rewebbing of Press N-19 on March 24, 2016 and amputated. The employer's rewebbing procedure did not meet the same level of protection as lock out/tag out. b. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; employees were exposed to ingoing nip points/caught-in hazards during the rewebbing process for Press 24. The employer's rewebbing procedure did not meet the same level of protection as lock out/tag out. c. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; employees were exposed to ingoing nip points/caught-in hazards during the rewebbing process for Press N-21. The employer's rewebbing procedure did not meet the same level of protection as lock out/tag out. d. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; employees were exposed to ingoing nip points/caught-in hazards during the rewebbing process for Press N-22. The employer's rewebbing procedure did not meet the same level of protection as lock out/tag out. e. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; employees were exposed to ingoing nip points and caught-in hazards on Goebel Press N-18 during the rewebbing process. At the time of inspection on April 22, 2016, the employer had posted signs on Goebel Press N-18 that the press would stop/start/speed up/slow down on its own. The employer's rewebbing procedure did not meet the same level of protection as lock out/tag out. f. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; employees were exposed to ingoing nip points and caught-in hazards on Goebel Press N-15 during the rewebbing process. At the time of inspection on April 22, 2016, the employer had posted signs on Goebel Press N-15 that the press would continuously "inch", instead of "inching" just once after each employee activation of the "inch" function. The employer's rewebbing procedure did not meet the same level of protection as lock out/tag out.
Recent events (3)
- · F (S) $0
- · C (S) $6300
- · Z (S) $6300
1910.212 A01
- Issued
- Aug 1, 2016
- Abate by
- Sep 6, 2018
- Penalty
- Initial $38,500 · Current $12,934 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc. a. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-19 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-19 had unguarded ingoing nip points in the perforating cylinder, exposing employees to a caught-in hazard. b. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-19 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-19 had unguarded ingoing nip points in the low profile die cutter, exposing employees to a caught-in hazard. c. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-19 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-19 had unguarded ingoing nip points in the pin feed, exposing employees to a caught-in hazard. d. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-24 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-24 had unguarded ingoing nip points in processing module unit 1, exposing employees to a caught-in hazard. e. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-24 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-24 had unguarded ingoing nip points in processing module unit 2, exposing employees to a caught-in hazard. f. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-24 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-24 had ingoing nip points in processing module unit 3 that were not adequately guarded. g. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-15 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-15 had unguarded ingoing nip points in processing module unit 1, exposing employees to a caught-in hazard. h. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-15 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-15 had unguarded ingoing nip points in processing unit 2, exposing employees to a caught-in hazard. i. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-18 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-18 had unguarded ingoing nip points in processing module unit 1, exposing employees to a caught-in hazard. j. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-18 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-18 had unguarded ingoing nip points in processing module unit 2, exposing employees to a caught-in hazard. k. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-18 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-18 had unguarded ingoing nip points in processing module unit 3, exposing employees to a caught-in hazard. l. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-22 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-22 had unguarded ingoing nip points in processing module unit 1, exposing employees to a caught-in hazard. m. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-22 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-22 had unguarded ingoing nip points in processing module unit 2, exposing employees to a caught-in hazard. n. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-22 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-22 had unguarded ingoing nip points in processing module unit 3, exposing employees to a caught-in hazard. p. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-21 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-21 had unguarded ingoing nip points in processing module unit 1, exposing employees to a caught-in hazard. p. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-21to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-21 had unguarded ingoing nip points in processing module unit 2, exposing employees to a caught-in hazard. q. R. R. Donnelley, 190 Milliken Drive SE, Hebron, OH 43025; Employees used Goebel Press N-21 to print and process custom printed materials that included, but were not limited to, flyers, letters, advertisements and inserts. Goebel Press N-21 had unguarded ingoing nip points in processing module unit 3, exposing employees to a caught-in hazard. The R R Donnelley and Sons Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard , 29 CFR 1910.212(a)(1): which was contained in OSHA inspection number 957321, citation number 1, item number 2 and was affirmed as a final order on June 10, 2015, with respect to a workplace located at 801 Union Street, Dwight, IL 60420.
Recent events (3)
- · F (S) $12934
- · C (R) $38500
- · Z (R) $38500
More inspections at RR Donnelley
Apr 30, 2025
GROVE CITY, OH
Feb 8, 2022
GROVE CITY, OH
Feb 25, 2021
PLOVER, WI
May 6, 2020
GREEN BAY, WI
Jan 17, 2020
SAINT CHARLES, IL
View RR Donnelley's full OSHA safety record →
More inspections in this industry (NAICS 541860)
Jul 31, 2026
Innovairre Company · FOREST, VA
Jun 23, 2026
Amsive LLC · BOLINGBROOK, IL
Mar 24, 2026
Print Mail Communications, INC. · FREDERICKSBURG, VA
Mar 17, 2026
Worldpak Flexible Packaging, LLC · RENO, NV
Feb 26, 2026
United States Postal Service · INDIANAPOLIS, IN
More inspections in OH
Aug 11, 2026
Humanetics Innovative Solutions, INC. · HURON, OH
Aug 11, 2026
Anderson Heating and Cooling · WILLOUGHBY, OH
Aug 11, 2026
The Sherwin Williams Company · MASSILLON, OH
Aug 10, 2026
Ohio Valley Veneer, INC. · PIKETON, OH
Aug 10, 2026
Mechanical Dynamics & Analysis LLC · EUCLID, OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341424976.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.