Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: KEITH TILDEN ROOFING COMPANY DBA TILDEN ROOFING CO., INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of KEITH TILDEN ROOFING COMPANY DBA TILDEN ROOFING CO., INC. in 924-930 ASHLAND AVE., RIVER FOREST, IL 60305 (NAICS 238160). OSHA activity number 341429033.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Keith Tilden Roofing Company DBA Tilden Roofing CO., INC. for free Get an email when a new federal OSHA severe-injury report for Keith Tilden Roofing Company DBA Tilden Roofing CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
924-930 ASHLAND AVE.
City
RIVER FOREST
State
IL
ZIP
60305
Mailing
252 W. LAKE ST., ELMHURST, IL 60126
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
Private (A)

5 citations on file for this inspection.

1926.451 G01 I

Serious Gravity 10 1 instance 2 exposed
Issued
Jul 6, 2016
Abate by
Jul 18, 2016
Penalty
Initial $5,390 · Current $2,960 Reduced
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system:      a)  On April 26, 2016, employees working from a ladder jack scaffold were exposed to a fall hazard of approximately 20.6 feet.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • · I (S) $2960
  • · Z (S) $5390

1926.452 K01

Serious Gravity 10 1 instance 2 exposed
Issued
Jul 6, 2016
Abate by
Jul 18, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.452(k)(1): Platforms exceeded a height of 20 feet (6.1 m):    a)  On April 26, 2016, employees were working from a ladder jack scaffold platform that exceeded 20 feet.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 6, 2016
Abate by
Jul 18, 2016
Penalty
Initial $3,850 · Current $2,080 Reduced
29 CFR 1926.454(a):  The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:      a)  On or about April 26, 2016, employees were not trained to recognize and eliminate the hazards associated with working from scaffolding.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (S) $2080
  • · Z (S) $3850

1926.501 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 6, 2016
Abate by
Jul 18, 2016
Penalty
Initial $3,080 · Current $1,660 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):       a)  On April 26, 2016, employees were exposed to fall hazards of approximately 9.8 feet while working around unprotected window wells.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (S) $1660
  • · Z (S) $3080

1926.502 D15

Other-than-serious 1 instance 1 exposed
Issued
Jul 6, 2016
Abate by
Jul 18, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.502(d)(15): Anchorages used for attachment of personal fall arrest equipment were not independent of any anchorage being used to support or suspend platforms and/or were not capable of supporting at least 5,000 pounds (22.2 kN) per employee:  a)  On April 26, 2016, anchorages being used for attachment of personal fall arrest equipment were not installed so that they would be capable of supporting at least 5,000 pounds per employee attached.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Keith Tilden Roofing Company DBA Tilden Roofing CO., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341429033.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.