DODGE CITY, KS —
OSHA Inspection: ROTO-MIX, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of ROTO-MIX, LLC in 2205 EAST WYATT EARP BLVD., DODGE CITY, KS 67801 (NAICS 112990). OSHA activity number 341444115.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROTO-MIX, LLC
- Site address
- 2205 EAST WYATT EARP BLVD.
- City
- DODGE CITY
- State
- KS
- ZIP
- 67801
- Mailing
- P. O. BOX 1724, DODGE CITY, KS 67801
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 112990
- Employees
- 70
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.179 J02 III
- Issued
- Jul 22, 2016
- Abate by
- Oct 15, 2016
- Penalty
- Initial $3,600 · Current $1,080 Reduced
General-duty citation text
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed: Employees engaged in manufacturing and maintenance activities were exposed to struck by hazards throughout the facility in that monthly inspections of hooks were not performed and properly recorded.
Recent events (2)
- — I (S) $1080
- — Z (S) $3600
1910.179 J02 IV
- Issued
- Jul 22, 2016
- Abate by
- Oct 15, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2)(iv): Monthly inspections of hoist chains, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected, were not performed: Employees engaged in manufacturing and maintenance activities were exposed to struck by hazards throughout the facility in that monthly inspections of hoist chains were not performed and properly recorded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV B
- Issued
- Jul 22, 2016
- Abate by
- Oct 15, 2016
- Penalty
- Initial $3,600 · Current $1,080 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used to run through holes in walls, ceilings, or floors. Employees engaged in manufacturing and maintenance activities were exposed to electrical hazards in that an extension cord was run through a hole in a wall and being used in the plasma office.
Recent events (2)
- — I (S) $1080
- — Z (S) $3600
1910.305 G02 III
- Issued
- Jul 22, 2016
- Abate by
- Oct 15, 2016
- Penalty
- Initial $3,600 · Current $1,080 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: Employees engaged in manufacturing and maintenance activities were exposed to electrical hazards in that strain relief was pulled in the following instances: a) an extension cord used by employees doing grinding in the plasma area. b) the west floor jig welder.
Recent events (2)
- — I (S) $1080
- — Z (S) $3600
1910.334 A02 II
- Issued
- Jul 22, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service and an employee was using it before repairs and tests necessary to render the equipment safe were made: Employees engaged in manufacturing and maintenance activities were exposed to electrical hazards in that an extension cord used by employees doing grinding in the plasma area had visible damage and was still in use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1026 D02 III
- Issued
- Jul 22, 2016
- Abate by
- Dec 30, 2016
- Penalty
- Initial $5,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.1026(d)(2)(iii): The employer used the scheduled monitoring option, and monitoring revealed employee exposures to chromium (VI) to be at or above the action level; however, the employer did not perform periodic monitoring at least every six months: The employer failed to continue periodic sampling for hexavalent chromium after levels above the action level had been identified.
Recent events (2)
- — I (W) $1500
- — Z (W) $5000
More inspections at Roto-Mix, LLC
View Roto-Mix, LLC's full OSHA safety record →
More inspections in this industry (NAICS 112990)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341444115.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.