JEFFERSON, ME —
OSHA Inspection: N.C. HUNT, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of N.C. HUNT, INC. in 10 CCC CAMP ROAD, JEFFERSON, ME 04348 (NAICS 321113). OSHA activity number 341450724.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- N.C. HUNT, INC.
- Site address
- 10 CCC CAMP ROAD
- City
- JEFFERSON
- State
- ME
- ZIP
- 04348
- Mailing
- 10 CCC CAMP ROAD, JEFFERSON, ME 04348
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 70
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.213 H01
- Issued
- May 17, 2016
- Abate by
- May 27, 2016
- Penalty
- Initial $3,850 · Current $2,695 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut: Planar Mill - The chop saw did not have the lower exposed portion of the blade guarded.
Recent events (2)
- — I (S) $2695
- — Z (S) $3850
1910.265 E06 I A
- Issued
- May 17, 2016
- Abate by
- May 25, 2016
- Penalty
- Initial $5,390 · Current $2,695 Reduced
General-duty citation text
29 CFR 1910.265(e)(6)(i)(a): Cutting head(s) on planner(s) were not guarded: Planar Mill - The top and bottom cutting heads on the planner were not adequately guarded.
Recent events (3)
- — F (S) $2695
- — C (S) $5390
- — Z (S) $5390
1910.265 E06 I C
- Issued
- May 17, 2016
- Abate by
- May 25, 2016
- Penalty
- Initial $5,390 · Current $3,773 Reduced
General-duty citation text
29 CFR 1910.265(e)(6)(i)(c): Pressure feed rolls on planner(s) were not guarded: Planar Mill - The feed rolls on the planner are not guarded.
Recent events (2)
- — I (S) $3773
- — Z (S) $5390
1904.39 A02
- Issued
- May 17, 2016
- Abate by
- May 23, 2016
- Penalty
- Initial $3,850 · Current $1,925 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer failed to report the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, within (24) twenty-four hours: At the Facility - The employer reported an employee's finger amputation 42 days after the work-related incident.
Recent events (2)
- — I (O) $1925
- — Z (O) $3850
More inspections at N.C. Hunt, INC.
View N.C. Hunt, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341450724.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.