OSHA Inspection: ADVANCED CONSTRUCTION AND DESIGN SERVICES, LLC

Issued

Oct 4, 2016

Abate by

Nov 7, 2016

Penalty

Initial $300 · Current $300

General-duty citation text

29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:     Advanced Construction and Design Services, LLC., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                       Item Number                            Abatement Date  01                                               03                                               08/23/2016     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jul 21, 2016

Penalty

Initial $1,600 · Current $1,600

General-duty citation text

29 CFR 1926.100(a):  Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:    a)  On May 5, 2016, employees were not wearing protective helmets where there was a possible danger of head injury.  No abatement certification or documentation is required for this item.

Issued

Jul 21, 2016

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:    a)  On May 5, 2016, employees engaged in carpentry work were not protected from fall hazards of up to approximately 30 feet to the ground while working along unprotected edges of the deck.     No abatement certification or documentation is required for this item.

Issued

Jul 21, 2016

Abate by

Aug 23, 2016

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee who might be exposed to fall hazards:     a)  On or about May 5, 2016, employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jul 21, 2016

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.1053(b)(4):  Ladder(s) were used for purposes other than the purpose for which they were designed:   a)  On May 5, 2016, employees were using a Keller A-Frame stepladder to access and egress a roof without its metal spreaders locked in an open position.   No abatement certification or documentation is required for this item.