Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SMITH FAMILY ENTERPRISES, LTD.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of SMITH FAMILY ENTERPRISES, LTD. in 1600 S MORRISSEY DR MORRISSEY CROSSING SHOPPING CENTER, BLOOMINGTON, IL 61704 (NAICS 238130). OSHA activity number 341455913.

Watch Smith Family Enterprises, LTD. — free Get an email when a new federal OSHA severe-injury report for Smith Family Enterprises, LTD. is published. One employer, no account, unsubscribe in one click.
Site address
1600 S MORRISSEY DR MORRISSEY CROSSING SHOPPING CENTER
City
BLOOMINGTON
State
IL
ZIP
61704
Mailing
33016 E 2000 N RD, COLFAX, IL 61728
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
3
Ownership type
A

6 citations on file for this inspection.

1926.452 C02

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.452(c)(2): Tubular welded frames and panels were not braced by cross, horizontal, or diagonal braces, or combination thereof, which would have secured vertical members together laterally:      On or about April 26, 2016, An employee accessed a tubular welded frame scaffold and was exposed to a fall hazard, in Bloomington, Illinois because the scaffolding was not stabilized by adequate cross bracings.  The side closest to the sign, was missing crossing bracing in all sections of the scaffolding.
Recent events (2)
  • — I (S) $2800
  • — Z (S) $2800

1926.454 A

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.454(a):  The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:      On or about April 26, 2016, An employee accessed a tubular welded frame scaffold and was exposed to a fall hazard, in Bloomington, Illinois, and was not provided training to recognize or minimize the fall hazards associated with scaffolds.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.20 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $0.00 Reduced
29 CFR 1926.20(b)(1): The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:       On or about April 26, 2016, An employee accessed a tubular welded frame scaffold and was exposed to a fall hazard, on a construction site in Bloomington.  The employer did not have an effective safety and health program with specific work rules, competent person oversight, and employee training to govern employees activities.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

1926.451 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $0.00 Reduced
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii)      On or about April 26, 2016, An employee accessed a tubular welded frame scaffold and was exposed to a fall hazard, on a construction site in Bloomington, because the working level was not fully planked. 29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.        On or about April 26, 2016, An employee accessed a tubular welded frame scaffold and was exposed to a fall hazard, while climbing the frame of the scaffolding to access the working level on a construction site in Bloomington, Illinois, because a ladder was not used.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 F07

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $0.00 Reduced
29 CFR 1926.451(f)(7):  Scaffolds were not erected, moved, dismantled, or altered only under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:      On or about April 26, 2016, An employee accessed a tubular welded frame scaffold and was exposed to a fall hazard, in Bloomington, Illinois, and the scaffold was not erected and moved under the director of a competent person before employees were allowed to access the scaffold.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1926.451 G01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:      On or about April 26, 2016, An employee accessed a tubular welded frame scaffold and was exposed to a fall hazard of approximately 15 feet, in Bloomington, Illinois, because there were no guardrails on the working level.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341455913.