BLOOMSBURG, PA ·
OSHA Inspection: AUTONEUM NORTH AMERICA, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AUTONEUM NORTH AMERICA, INC. in 480 W 5TH STREET, BLOOMSBURG, PA 17815 (NAICS 314110). OSHA activity number 341461200.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AUTONEUM NORTH AMERICA, INC.
- Site address
- 480 W 5TH STREET
- City
- BLOOMSBURG
- State
- PA
- ZIP
- 17815
- Mailing
- 480 W 5TH STREET, BLOOMSBURG, PA 17815
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 314110
- Employees
- 700
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 30, 2016
- Penalty
- Initial $2,250 · Current $1,688 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Dye Line Cutting Station: The unguarded portion of the cutter/ slitter exposed the operator to injury from the rotating parts of the spindle and blades, on or about May 12, 2016. CORRECTED DURING INSPECTION CERTIFICATION NOT REQUIRED
Recent events (2)
- · I (S) $1687.5
- · Z (S) $2250
1910.219 C02 I
- Issued
- Jun 30, 2016
- Penalty
- Initial $2,250 · Current $1,688 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, were not protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires: a) Extrusion Line: An unguarded rotating shaft between a pneumatic motor and the scrap rollers exposed employees to an entanglement hazard, on or about May 10, 2016. CORRECTED DURING INSPECTION CERTIFICATION NOT REQUIRED
Recent events (2)
- · I (S) $1687.5
- · Z (S) $2250
1910.219 D01
- Issued
- Jun 30, 2016
- Penalty
- Initial $2,250 · Current $1,688 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulleys, with parts which were less than seven (7) feet from the floor or working platform, were not guarded in accordance with the standards specified in paragraphs (m) and (o) of this section: a) Tool & Die Shop: The drive pulleys on the Fosdick 13 inch drill press were not fully enclosed by a guard exposing the operator to an in-running nip point hazard, on or about May 16, 2016. CORRECTED DURING INSPECTION CERTIFICATION NOT REQUIRED
Recent events (2)
- · I (S) $1687.5
- · Z (S) $2250
1910.219 E03 I
- Issued
- Jun 30, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical and inclined belts were not enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section: a) Tool & Die Shop: The drive belts on the Fosdick 13 inch drill press were not fully enclosed by a guard exposing the operator to the runs of the belt, on or about May 16, 2016. CORRECTED DURING INSPECTION CERTIFICATION NOT REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.303 B02
- Issued
- Jun 30, 2016
- Penalty
- Initial $2,250 · Current $1,688 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing or labeling: a) Fluid Dye Station: A pair of relocatable power taps that had been daisy-chained together and connected to an extension cord were not properly installed exposing a worker to an electric shock and fire hazard, on or about May 10, 2016. CORRECTED DURING INSPECTION CERTIFICATION NOT REQUIRED
Recent events (2)
- · I (S) $1687.5
- · Z (S) $2250
More inspections at Autoneum North America, INC.
View Autoneum North America, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 314110)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341461200.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.