Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FALCON TRANSPORT LOGISTICAL, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of FALCON TRANSPORT LOGISTICAL, INC. in 11917 SARA ROAD, LAREDO, TX 78045 (NAICS 484230). OSHA activity number 341467835.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Falcon Transport Logistical, INC. — free Get an email when a new federal OSHA severe-injury report for Falcon Transport Logistical, INC. is published. One employer, no account, unsubscribe in one click.
Site address
11917 SARA ROAD
City
LAREDO
State
TX
ZIP
78045
Mailing
11917 SARA ROAD, LAREDO, TX 78045
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
484230
Employees
12
Ownership type
A

5 citations on file for this inspection.

1910.177 C01

Serious Gravity 10 1 instance 2 exposed
Issued
Jul 26, 2016
Abate by
Aug 12, 2016
Penalty
Initial $2,800 · Current $1,500 Reduced
29 CFR 1910.177(c)(1): The employer did not provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to follow while servicing rim wheels:    At the worksite, employees serviced single rim tires of semi-tractor trailer trucks; exposing them to the hazards of being struck by the tire and/or rim.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2800

1910.177 D02

Serious Gravity 10 1 instance 2 exposed
Issued
Jul 26, 2016
Abate by
Aug 12, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.177(d)(2): The employer did not provide a restraining device or a barrier to be used when inflating tires on single piece rim wheels which are not bolted onto the vehicles:  At the worksite, employees serviced single rim tires of semi-tractor trailer trucks; exposing them to the hazards of being struck by the tire and/or rim.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L06

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 26, 2016
Abate by
Aug 12, 2016
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    At the worksite, employees operating forklifts had not been evaluated and certified; exposing the employees to struck by hazards.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1910.132 D02

Other-than-serious 1 instance 2 exposed
Issued
Jul 26, 2016
Abate by
Aug 12, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:  At the worksite, employees perform job duties exposing them to hazards such as but not limited to noise, welding, tire servicing and forklift operations. The employer failed to conduct and/or certify that a hazard assessment had been completed.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 Q06

Other-than-serious 1 instance 1 exposed
Issued
Jul 26, 2016
Abate by
Aug 12, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(6): Powered industrial trucks were altered so that the relative positions of the various parts were different from what they were when originally received from the manufacturer, by the addition of extra parts not provided by the manufacturer, or by the elimination of any parts without the manufacturer's approval:  At the worksite, employees used a job fabricated metal work platform/basket attached to the forklift truck; exposing them to fall hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341467835.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.