AMITE, LA —
OSHA Inspection: AMITE MARBLE & GRANITE INC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of AMITE MARBLE & GRANITE INC in 414 E OAK STREET, AMITE, LA 70422 (NAICS 327991). OSHA activity number 341472330.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMITE MARBLE & GRANITE INC
- Site address
- 414 E OAK STREET
- City
- AMITE
- State
- LA
- ZIP
- 70422
- Mailing
- 414 E OAK STREET, AMITE, LA 70422
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 8
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.184 I01
- Issued
- May 23, 2016
- Abate by
- Jun 5, 2016
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.184(i)(1): Synthetic web sling(s) were not marked or coded to show rated capacities for each type of hitch and type of synthetic web material: On or about 5/13/2016, in the shop area, the employer allowed employees to use synthetic web slings in order to transport headstones through the shop and did not ensure that the slings were marked to show the rated capacity.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.184 I09 III
- Issued
- May 23, 2016
- Abate by
- Jun 5, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(i)(9)(iii): Synthetic web sling(s) with snags, punctures, tears, or cuts were not immediately removed from service: On or about 5/13/2016, in the shop area, the employer allowed employees to transport headstones using slings and did not ensure that slings with tears were removed from service.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F03
- Issued
- May 23, 2016
- Penalty
- Initial $1,020 · Current $612 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: On or about 5/13/2016, in the shop, the employer allowed employees to load and unload headstones from an abrasive blasting machine and did not ensure that a sprocket and chain on the machine were enclosed.
Recent events (2)
- — I (S) $612
- — Z (S) $1020
1910.242 B
- Issued
- May 23, 2016
- Penalty
- Initial $1,020 · Current $612 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: On or about 5/13/2016, on the northwest side of the shop, the employer allowed employees to clean dust off themselves, the floor, and other surfaces using compressed air and did not ensure that the pressure was reduced to less than 30 p.s.i.
Recent events (2)
- — I (S) $612
- — Z (S) $1020
1910.95 D01
- Issued
- May 23, 2016
- Abate by
- Jun 10, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.95(d)(1): When information indicated that any employee's exposure equaled or exceed the 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: On or about 5/13/2016, in the shop, the employer allowed employees to operate equipment which produced noise in excess of 85 dBA and did not implement a monitoring program.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G02 III
- Issued
- May 23, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: On or about 5/13/2016, in the northwest side of the shop, the employer allowed employees to use a worn extension which did not have strain relief.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Amite Marble & Granite INC
View Amite Marble & Granite INC's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341472330.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.