Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: TEXAS STEEL FABRICATORS INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of TEXAS STEEL FABRICATORS INC. in 28306 FM 2920, WALLER, TX 77484 (NAICS 332312). OSHA activity number 341484780.

Watch Texas Steel Fabricators INC. — free Get an email when a new federal OSHA severe-injury report for Texas Steel Fabricators INC. is published. One employer, no account, unsubscribe in one click.
Site address
28306 FM 2920
City
WALLER
State
TX
ZIP
77484
Mailing
28306 FM 2920, WALLER, TX 77484
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
15
Ownership type
A

5 citations on file for this inspection.

1910.212 A03 II

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):      On or about May 18, 2016 at the facility where employees were exposed to caught-in/between hazards while operating an iron worker punch press SN: 442364660206004 without having the point of operation guarded.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1910.303 F02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:      On or about May 18, 2016 at the facility where two breaker boxes were not labeled to identify each breaker and or switch.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $960.00 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:      On or about May 18, 2016, at the facility where employees were using compressed gases and hazardous chemicals such as oxygen and argon gas, diesel fuel without a written hazard communication program in place.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

1910.1200 H01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    On or about May 18, 2016, at the facility, where employees were using chemicals and compressed gases such as, oxygen and argon gas, and diesel fuel had not been previously trained in the hazards of the chemicals in their work area.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical in use    On or about May 18, 2016 at the facility, where employees did not have a safety data sheet for the compressed gases and hazardous chemicals that are in use.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341484780.