OXFORD, MS —
OSHA Inspection: FRANCISCO CHEPATA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FRANCISCO CHEPATA in 1801 E. JACKSON AVE., OXFORD, MS 38655 (NAICS 238130). OSHA activity number 341492403.
Where did this inspection happen?
- Establishment
- FRANCISCO CHEPATA
- Site address
- 1801 E. JACKSON AVE.
- City
- OXFORD
- State
- MS
- ZIP
- 38655
- Mailing
- 913 S. 18TH ST. LOT 56, OXFORD, MS 38655
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.501 B01
- Issued
- Jun 15, 2016
- Abate by
- Jun 23, 2016
- Penalty
- Initial $3,080 · Current $3,080
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. (a) Building #6 and #7 - On or about May 18, 2016 employees installing wood trim on the second story balcony 12 feet 6 inches high were exposed to a fall hazard.
Recent events (1)
- — Z (S) $3080
1926.304 I01
- Issued
- Jun 15, 2016
- Abate by
- Jun 17, 2016
- Penalty
- Initial $2,200 · Current $2,200
General-duty citation text
29 CFR 1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut. (a) Building #6 - On or about May 18, 2016 employees were using a Dewalt 10 inch table saw with no blade guard above the table exposing employees to an amputation hazard.
Recent events (1)
- — Z (S) $2200
1926.1052 C01 II
- Issued
- Jun 15, 2016
- Abate by
- Jun 23, 2016
- Penalty
- Initial $3,080 · Current $3,080
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge: (a) building # 1 thru 8 - On or about May 18, 2016 employees installing trim around windows on second story balcony were using stairs that have an unprootected side exposing employees to a fall hazard.
Recent events (1)
- — Z (S) $3080
1926.404 F06
- Issued
- Jun 15, 2016
- Abate by
- Jun 17, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: (a) Building #6 - On or about May 18, 2016 employees using Dewalt 10 " table saw with replacement plug on cord while ground prong is jammed inside plug thereby not making permanent and continuous ground connection exposing employees to an electrical shock hazard.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 238130)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341492403.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.