OSHA Inspection: MG24 CONSTRUCTION LLC

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $3,850 · Current $3,850

General-duty citation text

29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:  On or about February 26, 2016, at 498 Glen Terrace Trace, Grayson, Georgia:  An employee performing framing work was exposed to an approximately 6-foot fall when he worked from the top step of an aluminum ladder.

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $3,520 · Current $3,520

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  On or about February 26, 2016, at 484 Glen Terrace Trace, Grayson, Georgia:  Two employees performing framing work were exposed to struck-by hazards from the falling hammers, lumber, of the employees working above them when they did not use head protection while working beneath those employees.   MG24 Construction was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.100(a), which was contained in OSHA inspection number 1068175, citation number 1, item number 1, and was affirmed as a final order on August 31, 2015, with respect to a workplace located at 484 Napa Valley Lane, Lawrenceville, Georgia.

Issued

Jun 24, 2016

Abate by

Jul 21, 2016

Penalty

Initial $10,780 · Current $10,780

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   On or about February 26, 2016, at 498 Glen Terrace Trace, Grayson, Georgia:  Three employees performing framing work were exposed to fall hazards of approximately 10.7-feet up to 19.3-feet when they worked from the top plate and unprotected edges of the building without using fall protection.   MG24 Construction, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1068175, citation number 1, item number 2, and was affirmed as a final order on August 31, 2015, with respect to a workplace located at 484 Napa Valley Lane, Lawrenceville, Georgia.