WICHITA, KS —
OSHA Inspection: CAPPS MANUFACTURING INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CAPPS MANUFACTURING INC. in 2121 S. EDWARDS ST., WICHITA, KS 67213 (NAICS 332312). OSHA activity number 341501849.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CAPPS MANUFACTURING INC.
- Site address
- 2121 S. EDWARDS ST.
- City
- WICHITA
- State
- KS
- ZIP
- 67213
- Mailing
- 2121 S. EDWARDS ST., WICHITA, KS 67213
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 166
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.23 C01
- Issued
- Jul 19, 2016
- Abate by
- Aug 12, 2016
- Penalty
- Initial $4,500 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v)), on all open sides: The Chemical Processing area, the storage area above the maintenance room, employees were exposed to fall hazards of approximately 10 feet from the top of the maintenance room to the concrete below, in that a fall protection system was not in place to keep employees from falling.
Recent events (2)
- — I (S) $2250
- — Z (S) $4500
1910.178 A06
- Issued
- Jul 19, 2016
- Abate by
- Aug 12, 2016
- Penalty
- Initial $2,700 · Current $1,350 Reduced
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates and markings were in place: Employees operating forklifts at the facility were exposed to struck-by hazards. The employees were exposed in that the control lever(s) were missing markings, to avoid striking someone or something. a) In the Trim and Fab Area, Allis-Chalmers forklift (Model-ACP100NC Serial-83M062A) b) In the Main Building, Clark forklift (Serial- 3013632520) c) In the Processing Building, Clark forklift (Serial- 3357183557) d) In the Shear Area, Clark forklift (Serial- 3353962535)
Recent events (2)
- — I (S) $1350
- — Z (S) $2700
1910.212 B
- Issued
- Jul 19, 2016
- Abate by
- Aug 12, 2016
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: On or about 05/18/16 in the trim and fab area, at the location of 3154 S. Clifton in Wichita KS, an employee engaged in operating a disc sander was exposed to amputations. The employee was exposed in that the disc sander was not anchored to avoid the rocking motion from side to side.
Recent events (2)
- — I (S) $1800
- — Z (S) $3600
1910.213 D01
- Issued
- Jul 19, 2016
- Abate by
- Aug 12, 2016
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: In the Shipping area, employees operating a 10-inch Table Saw (Skill Saw Model-3310-01 15-Amp) were exposed to amputation hazards. The employees were exposed in that a blade guard was not on the Skill Saw while in use.
Recent events (2)
- — I (S) $3150
- — Z (S) $6300
1910.303 B02
- Issued
- Jul 19, 2016
- Abate by
- Aug 12, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: In the Deburring Department, an electrical conduit box was not fixed to a structure.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Capps Manufacturing INC.
View Capps Manufacturing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341501849.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.