Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: A & S MASONRY, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of A & S MASONRY, LLC in 1415 WHITEWATER, IDAHO FALLS, ID 83402 (NAICS 238140). OSHA activity number 341509651.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch A & S Masonry, LLC for free Get an email when a new federal OSHA severe-injury report for A & S Masonry, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
A & S MASONRY, LLC
Site address
1415 WHITEWATER
City
IDAHO FALLS
State
ID
ZIP
83402
Mailing
PO BOX 688, RIGBY, ID 83442
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
6
Ownership type
Private (A)

8 citations on file for this inspection.

1926.300 B01

Serious Gravity 1 1 instance 1 exposed
Issued
Aug 1, 2016
Abate by
Aug 11, 2016
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.300(b)(1): When power operated tools are designed to accommodate guards, they were not equipped with such guards when in use:  a) Building 4: On May 18, 2016 an employee used a hand held grinder to cut masonry stone.  A guard was not in place on the grinder to protect the employees hands and fingers.    Note) Certification of corrective action IS required for this item.
Recent events (1)
  • · Z (S) $1200

1926.451 C01 II

Serious Gravity 10 1 instance 4 exposed
Issued
Aug 1, 2016
Abate by
Aug 11, 2016
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.451(c)(1)(ii): Guys, ties, and braces were not installed at the closest horizontal member to the 4:1 height and be repeated vertically at locations of horizontal members every 20 feet (6.1 m) or less thereafter for scaffolds 3 feet (0.91 m) wide or less, and every 26 feet (7.9 m) or less thereafter for scaffolds greater than 3 feet (0.91 m) wide:  a) Building 2: On May 18, 2016 and at times prior thereto employees performed masonry and stucco work from a four level, self-supported scaffold system.  The scaffold ties were installed at an angle to the building from the top of each outer upright pole above the 20 and 26 foot level.         Note) Certification and documentation ARE required for this item.
Recent events (1)
  • · Z (S) $2800

1926.451 C02

Serious Gravity 10 1 instance 4 exposed
Issued
Aug 1, 2016
Abate by
Aug 11, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, and uprights did not bear on base plates and mud sills or other adequate firm foundation:  a) Building 2 and 4: On May 18, 2016 and at times prior thereto employees performing stucco and masonry activities worked from multi-level scaffold systems without mud sills and/or base plates in place on the bottom of all of the upright scaffold poles.    Note) Certification and documentation of corrective action ARE required for this item.
Recent events (1)
  • · Z (S) $0

1926.451 G04 IV

Serious Gravity 10 1 instance 4 exposed
Issued
Aug 1, 2016
Abate by
Aug 11, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(4)(iv): When mid-rails were used, they were not installed at a height approximately midway between the top edge of the guardrail system and the platform surface:  a) Building 2: On May 18, 2016 and at times prior thereto employees performed masonry activities on a multi-level scaffold system.  The horizontal members used as the mid-rails were installed too close the cross braces installed and used as the top rails of the complete guardrail system.   Note) Certification of corrective action IS required for this item.
Recent events (1)
  • · Z (S) $0

1926.451 H01

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 1, 2016
Abate by
Aug 11, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.451(h)(1): In addition to wearing hardhats each employee on a scaffold was not provided with additional protection from falling hand tools, debris, and other small objects through the installation of toeboards, screens, or guardrail systems, or through the erection of debris nets, catch platforms, or canopy structures that contain or deflect the falling objects:   a) Building 2: On May 18, 2016 and at times prior thereto employees performed masonry and stucco activities from a four level self-supporting scaffold system.  Toe boards were not in place on any level of the scaffold.    Note) Certification and documentation of corrective action ARE required for this item.
Recent events (1)
  • · Z (S) $0

1926.454 B02

Serious Gravity 10 1 instance 4 exposed
Issued
Aug 1, 2016
Abate by
Aug 25, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.454(b)(2): The employer did not have each employee who is involved trained by a competent person to recognize the correct procedures for erecting, disassembling, moving, operating, repairing, inspecting, and maintaining the type of scaffold in question:  a) Building 2: On May 18, 2016 and at times prior thereto employees performed masonry and stucco activities from a four level self-supporting scaffold system.  The employees did not recognize or acknowledge the hazards of working without a properly spaced guardrail system in place, and take action to minimize or correct the hazard.    b) Building 2: On May 18, 2016 and at times prior thereto employees performed masonry and stucco activities from a four level self-supporting scaffold system.  The employees did not recognize or acknowledge the hazards of working without toe boards in place, and take action to minimize or correct the hazard.    c) Building 2: On May 18, 2016 and at times prior thereto employees performed masonry and stucco activities from a four level self-supporting scaffold system.  The employees did not recognize or acknowledge the hazards of working without the proper tie-ins from the scaffold to the building, and take action to minimize or correct the hazard.    d) Building 2 and building 4: On May 18, 2016 and at times prior thereto employees performed masonry and stucco activities from a four level and single level self-supporting scaffold systems.  The employees did not recognize or acknowledge the hazards of working without mud sills and base plates in place, and take action to minimize or correct the hazard.    Note) Certification and documentation of corrective action ARE required for this item.
Recent events (1)
  • · Z (S) $0

1926.21 B03

Other-than-serious 1 instance 1 exposed
Issued
Aug 1, 2016
Abate by
Aug 11, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.21(b)(3): Employees required to handle or use poisons, caustics, and other harmful substances were not instructed regarding the safe handling and use, and be made aware of the potential hazards, personal hygiene, and personal protective measures required:  a) Building 4: On May 18, 2016 an employee performing dry cutting on a piece of masonry stone was not aware of , or did not acknowledge the hazards associated with this activity.    Note) Certification of corrective action IS required for this item.
Recent events (1)
  • · Z (O) $0

1910.134 D01 III

Other-than-serious 1 instance 5 exposed
Issued
Aug 1, 2016
Abate by
Aug 11, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace:   a) Jobsite: On May 18, 2016 an at times prior thereto the employer had not identified and made an evaluation of the respiratory hazards of dry cutting masonry stone.    Note) Certification of corrective action IS required for this item.
Recent events (1)
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 341509651.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.