Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NEW ENGLAND STONE INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of NEW ENGLAND STONE INC. in 35 HIGGINS DRIVE, MILFORD, CT 06460 (NAICS 238340). OSHA activity number 341516367.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch NEW England Stone INC. — free Get an email when a new federal OSHA severe-injury report for NEW England Stone INC. is published. One employer, no account, unsubscribe in one click.
Site address
35 HIGGINS DRIVE
City
MILFORD
State
CT
ZIP
06460
Mailing
35 HIGGINS DRIVE, MILFORD, CT 06460
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238340
Employees
20
Ownership type
A

8 citations on file for this inspection.

1910.178 L04 III

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 27, 2016
Penalty
Initial $1,600 · Current $1,100 Reduced
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.    WORKSHOP:  The employer had not evaluated the performance of the powered industrial truck (PIT) operators at least once every three years.
Recent events (2)
  • — I (S) $1100
  • — Z (S) $1600

1910.305 G02 III

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 27, 2016
Penalty
Initial $2,000 · Current $1,400 Reduced
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws.    WORKSHOP:  The outer sheathing of the flexible cord to the disconnect of the Zamboni radial arm polishing machine was pulled away from the grip.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1910.1200 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 27, 2016
Abate by
Aug 12, 2016
Penalty
Initial $1,600 · Current $1,100 Reduced
29 CFR 1910.1200(e)(1): Written hazard communication program.  Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met.    WORKSHOP:  The written hazard communication program had not included the Globalized Harmonized System (GHS) where employees were required to work with chemicals, such as (but not limited to) acetone, epoxy, and sealers.
Recent events (2)
  • — I (S) $1100
  • — Z (S) $1600

1910.1200 H01

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 27, 2016
Abate by
Aug 12, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.  WORKSHOP:  The employees, required to work with chemicals, such as (but not limited to) acetone, epoxy, and sealers were not provided with training and information in the chemical hazard communications including the Globalized Harmonized System.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.95 G06

Other-than-serious 1 instance 3 exposed
Issued
Jun 27, 2016
Abate by
Aug 12, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.95(g)(6): At least annually after obtaining the baseline audiogram, the employer did not obtain a new audiogram for each employee exposed at or above an 8-hour time-weighted average of 85 decibels:  WORKSHOP:  The employer did not obtain an annual hearing audiogram for the employees required to wear hearing protection.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.132 D01

Other-than-serious 1 instance 3 exposed
Issued
Jun 27, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(1): The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:  WORKSHOP:  The employer had not conducted the Workplace Hazard Assessment to determine necessitate and appropriate types of personal protective equipment (PPE) for employees.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 K

Other-than-serious 1 instance 3 exposed
Issued
Jun 27, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k): Training and information. This paragraph requires the employer to provide effective training to employees who are required to use respirators. The training must be comprehensive, understandable, and recur annually, and more often if necessary. This paragraph also requires the employer to provide the basic information on respirators in Appendix D of this section to employees who wear respirators when not required by this section or by the employer to do so.  WORKSHOP:  The employer had not provided the employees, who were optionally wearing double strapped filtering facepieces with the information in the Appendix D.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 P01

Other-than-serious 1 instance 2 exposed
Issued
Jun 27, 2016
Abate by
Aug 12, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.178(p)(1): If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition.  WORKSHOP:  The right front light of the Caterpillar 60 powered industrial truck was not operable.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View NEW England Stone INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341516367.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.