Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: APEX METAL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of APEX METAL, INC. in 315 HUDSON STREET, NEW YORK, NY 10013 (NAICS 238190). OSHA activity number 341530525.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Apex Metal, INC. for free Get an email when a new federal OSHA severe-injury report for Apex Metal, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
APEX METAL, INC.
Site address
315 HUDSON STREET
City
NEW YORK
State
NY
ZIP
10013
Mailing
79 ALBERTSON AVENUE, ALBERTSON, NY 11507
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238190
Employees
5
Ownership type
A

8 citations on file for this inspection.

1926.21 B02

Serious Gravity 5 1 instance 5 exposed
Issued
Jul 31, 2016
Abate by
Aug 14, 2016
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:    a) 315 Hudson Street, entire worksite, on or about 6-1-16:  Employees were working without the training necessary to recognize the hazards associated with their work.     ABATEMENT CERTIFICATION REQUIRED FOR THIS ITEM
Recent events (1)
  • · Z (S) $2000

1926.100 A

Serious Gravity 1 1 instance 5 exposed
Issued
Jul 31, 2016
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:    a) 315 Hudson Street, east side of building, entry canopy area, on or about 6-1-16:  Employees were working with sharp metal building materials and working beneath other employees, without head protection.
Recent events (1)
  • · Z (S) $1200

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 31, 2016
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:    a) 315 Hudson Street, east side of main room, on or about 6-1-16:  One employee was using a miter saw to cut aluminum plate, without eye protection.
Recent events (1)
  • · Z (S) $1600

1926.404 B01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 31, 2016
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupters for personal protection:    a) 315 Hudson Street, east side of main room, on or about 6-1-16:  One employee was using a miter saw that was powered through a receptacle that was not protected by a ground fault circuit interrupter (GFCI).
Recent events (1)
  • · Z (S) $1600

1926.405 G02 III

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 31, 2016
Abate by
Aug 9, 2016
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.405(g)(2)(iii): Flexible cords were not used in continuous lengths without splice or tap:    a) 315 Hudson Street, east side of main room, on or about 6-1-16:  One employee was operating various portable power tools through a branch circuit that was not continuous in length and had a splice that was not in a box.     ABATEMENT CERTIFICATION IS REQUIRED FOR THIS ITEM
Recent events (1)
  • · Z (S) $1600

1926.501 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 31, 2016
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:    a) 315 Hudson Street, east side of building, entry canopy area, on or about 6-1-16:  Two employees were working on an entry canopy, without fall protection, exposing the employees to a fall hazard of 9 feet 10 inches.
Recent events (1)
  • · Z (S) $2000

1926.1053 B01

Serious Gravity 5 3 instances 5 exposed
Issued
Jul 31, 2016
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    a) 315 Hudson Street, east side of building, entry canopy area, on or about 6-1-16:  Employees used step ladders to access an entry canopy area which were 22 inches and 46 inches below the landing surface, exposing the employees to a fall hazard of 9 feet 10 inches.
Recent events (1)
  • · Z (S) $1600

1926.1053 B13

Serious Gravity 5 3 instances 5 exposed
Issued
Jul 31, 2016
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:    a) 315 Hudson Street, east side of building, entry canopy area, on or about 6-1-16:  Employees used the top step and top platform of a ladder, exposing the employees to a fall hazard of 6 feet and 8 feet.
Recent events (1)
  • · Z (S) $1600

View Apex Metal, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341530525.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.