DUBLIN, OH —
OSHA Inspection: MIGUEL YADAICELA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MIGUEL YADAICELA in 7142 TUSCANY DRIVE, DUBLIN, OH 43017 (NAICS 238130). OSHA activity number 341537975.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIGUEL YADAICELA
- Site address
- 7142 TUSCANY DRIVE
- City
- DUBLIN
- State
- OH
- ZIP
- 43017
- Mailing
- 931 DRAYSON DRIVE, GALLOWAY, OH 43119
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 9
- Ownership type
- A
Citations
4 citations on file for this inspection.
1903.19 D01
- Issued
- Sep 22, 2016
- Abate by
- Oct 27, 2016
- Penalty
- Initial $400 · Current $400
General-duty citation text
29 CFR 1903.19(d)(1): The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required: a. In regards to citation 1, item 1, issued on July 8, 2016, the employer has failed to submit abatement certification and documentation within ten days of the abatement date, July 26, 2016. The violation read as follows: 29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards: a. On June 9, 2016, employees were working on the top plate of the single family residential home installing trusses without fall protection training which resulted in an employee falling 12 feet. b. In regards to citation 1, item 2, issued on July 8, 2016, the employer has failed to submit abatement certification and documentation within ten days of the abatement date, July 21, 2016. The violation read as follows: 29 CFR 1926.1051(a): A stairway or ladder shall be provided at all personnel points of access where there is a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist is provided: a. On June 9, 2016, an employee was observed climbing the trusses to get off the roof, thereby exposing the employee to a fall hazard of ten feet c. In regards to citation 2, item 1, issued on July 8, 2016, the employer has failed to submit abatement certification and documentation within ten days of the abatement date, July 26, 2016. The violation read as follows: 29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities six feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502: a. On June 9, 2016, an employee fell from the top plate while installing trusses without fall protection resulting in fall related injuries. b. On June 9, 2016, an employee was observed working on the top plate installing trusses without fall protection, thereby exposing employees to a fall hazard of ten feet.
Recent events (1)
- — Z (O) $400
1926.503 A01
- Issued
- Jul 6, 2016
- Abate by
- Jul 26, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. a. On June 9, 2016, employees were working on the top plate of the single family residential home installing trusses without fall protection training which resulted in an employee falling 12 feet.
Recent events (1)
- — Z (S) $2800
1926.1051 A
- Issued
- Jul 6, 2016
- Abate by
- Jul 21, 2016
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.1051(a): A stairway or ladder shall be provided at all personnel points of access where there is a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist is provided. a. On June 9, 2016, an employee was observed climbing the trusses to get off the roof, thereby exposing the employee to a fall hazard of 10 feet.
Recent events (1)
- — Z (S) $2800
1926.501 B13
- Issued
- Jul 6, 2016
- Abate by
- Jul 26, 2016
- Penalty
- Initial $28,000 · Current $28,000
General-duty citation text
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502. a. On June 9, 2016, an employee fell from the top plate while installing trusses without fall protection resulting in fall related injuries. b. On June 9, 2016, an employee was observed working on the top plate installing trusses without fall protection, thereby exposing employees to a fall hazard of 10 feet.
Recent events (1)
- — Z (W) $28000
More inspections at Miguel Yadaicela
View Miguel Yadaicela's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341537975.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.